1321: Upgrading nginx TLS configuration r=mergify[bot] a=radtkedev
## What type of PR?
Enhancement
## What does this PR do?
Upgrades the TLS protocols and ciphers to the recommended "Intermediate Configuration" and sets the "Old Configuration" for port 25 (SMTP) based on the [Mozilla SSL Configuration Generator](https://ssl-config.mozilla.org/) and adjusted for the nginx mail proxy.
Co-authored-by: Tom Radtke <tom@radtke.dev>
1349: Add support for SRS, related to #328 r=mergify[bot] a=kaiyou
## What type of PR?
Feature
## What does this PR do?
It implements SRS using a Python SRS library.
### Related issue(s)
- closes#328
## Prerequistes
Before we can consider review and merge, please make sure the following list is done and checked.
If an entry in not applicable, you can check it or remove it from the list.
- [x] In case of feature or enhancement: documentation updated accordingly
- [x] Unless it's docs or a minor change: add [changelog](https://mailu.io/master/contributors/guide.html#changelog) entry file.
Co-authored-by: kaiyou <pierre@jaury.eu>
Since direct addresses (not aliases) are case-insensitive since a while,
it makes sense for aliases to behave the same. Up until now, a wildcard
alias could trump a alias not-matching-the-case of the incoming address.
This clarifies this behavior.
closes#1387
Rate limiting was already redesigned to use Python limits. This
introduced some unexpected behavior, including the fact that only
one criteria is supported per limiter. Docs and setup utility are
updated with this in mind.
Also, the code was made more generic, so limiters can be delivered
for something else than authentication. Authentication-specific
code was moved directly to the authentication routine.
1278: Limiter implementation r=kaiyou a=micw
## What type of PR?
(Feature, enhancement, bug-fix, documentation)
## What does this PR do?
Adds a custom limter based on the "limits" lirary that counts up on failed auths only
### Related issue(s)
- closes#1195
- closes#634
## Prerequistes
- [X] Unless it's docs or a minor change: add [changelog](https://mailu.io/master/contributors/guide.html#changelog) entry file.
Co-authored-by: Michael Wyraz <michael@wyraz.de>
Co-authored-by: micw <michael@wyraz.de>
1316: Fix the encoding of incoming user email and password r=mergify[bot] a=kaiyou
## What type of PR?
Bug fix
## What does this PR do?
As described in the changes, RFC2616 states that header should be considered ISO8859-1 in HTTP, which obviously nginx does not really care about when forwarding the password from SMTP authentication to the backend. Hence, we need to encode-then-decode passwords to get the proper value in case a special char is in there.
### Related issue(s)
- This fixes#1139
- This is also related to #1281
- This is also related to #1139
## Prerequistes
Before we can consider review and merge, please make sure the following list is done and checked.
If an entry in not applicable, you can check it or remove it from the list.
- [x] In case of feature or enhancement: documentation updated accordingly
- [x] Unless it's docs or a minor change: add [changelog](https://mailu.io/master/contributors/guide.html#changelog) entry file.
Co-authored-by: kaiyou <pierre@jaury.eu>
Currently we are not able to offer our users a FTS experience after the
demise of lucene due to unfixed coredumps with musl/alpine.
We now add lucene, the only remaining maintained small/lean FTS plugin
for dovecot. It is quite simple to add to our stack: A two-stage docker
build is used to compile the fts plugin in the first stage, and copy
over only the resulting plugin-artifact to the second stage, which is
our usual dovecot container. Configuration is also minimal.
1299: Don't remove the address extension in postfix r=mergify[bot] a=RobertMe
## What type of PR?
Bugfix
## What does this PR do?
Currently when the mail address is looked up by Postfix (using the admin
part) the address extension is removed. This is due to the address
extension being removed to look up the user, and afterwards returning
the users mail address. But by not returning the mail address including
the address extension it also isn't part anymore in the LMTP
communication to Dovecot. So Dovecot doesn't know about the extension,
and in turn the address extension can't be used in Sieve mail filtering.
This change fixes that by returning the original address by just
concatinating the "localpart" and domain again when the user is found.
### Related issue(s)
Fixes#982
## Prerequistes
Before we can consider review and merge, please make sure the following list is done and checked.
If an entry in not applicable, you can check it or remove it from the list.
- [ ] In case of feature or enhancement: documentation updated accordingly
- [ ] Unless it's docs or a minor change: add [changelog](https://mailu.io/master/contributors/guide.html#changelog) entry file.
Co-authored-by: Robert Meijers <robert.meijers@gmail.com>
Currently when the mail address is looked up by Postfix (using the admin
part) the address extension is removed. This is due to the address
extension being removed to look up the user, and afterwards returning
the users mail address. But by not returning the mail address including
the address extension it also isn't part anymore in the LMTP
communication to Dovecot. So Dovecot doesn't know about the extension,
and in turn the address extension can't be used in Sieve mail filtering.
This change fixes that by returning the original address by just
concatinating the "localpart" and domain again when the user is found.
Fixes#982
985: Permit raspberry pi (and other architectures) builds r=mergify[bot] a=abondis
## What type of PR?
Enhancement
## What does this PR do?
Add an option to select base images and permit building for different CPU architectures.
### Related issue(s)
N/A
## Prerequistes
- [X] documentation updated accordingly
- [x] Unless it's docs or a minor change: add [changelog](https://mailu.io/master/contributors/guide.html#changelog) entry file.
Co-authored-by: Aurélien Bondis <aurelien.bondis@gmail.com>
Co-authored-by: Aurelien <aurelien.bondis@gmail.com>
1213: Bump werkzeug from 0.15.2 to 0.15.3 in /core/admin r=mergify[bot] a=dependabot[bot]
Bumps [werkzeug](https://github.com/pallets/werkzeug) from 0.15.2 to 0.15.3.
<details>
<summary>Release notes</summary>
*Sourced from [werkzeug's releases](https://github.com/pallets/werkzeug/releases).*
> ## 0.15.3
> * Blog: https://palletsprojects.com/blog/werkzeug-0-15-3-released/
> * Changes: https://werkzeug.palletsprojects.com/en/0.15.x/changes/#version-0-15-3
>
</details>
<details>
<summary>Changelog</summary>
*Sourced from [werkzeug's changelog](https://github.com/pallets/werkzeug/blob/master/CHANGES.rst).*
> Version 0.15.3
> --------------
>
> Released 2019-05-14
>
> - Properly handle multi-line header folding in development server in
> Python 2.7. (:issue:`1080`)
> - Restore the ``response`` argument to :exc:`~exceptions.Unauthorized`.
> (:pr:`1527`)
> - :exc:`~exceptions.Unauthorized` doesn't add the ``WWW-Authenticate``
> header if ``www_authenticate`` is not given. (:issue:`1516`)
> - The default URL converter correctly encodes bytes to string rather
> than representing them with ``b''``. (:issue:`1502`)
> - Fix the filename format string in
> :class:`~middleware.profiler.ProfilerMiddleware` to correctly handle
> float values. (:issue:`1511`)
> - Update :class:`~middleware.lint.LintMiddleware` to work on Python 3.
> (:issue:`1510`)
> - The debugger detects cycles in chained exceptions and does not time
> out in that case. (:issue:`1536`)
> - When running the development server in Docker, the debugger security
> pin is now unique per container.
</details>
<details>
<summary>Commits</summary>
- [`9b1123a`](9b1123a779) release version 0.15.3
- [`00bc43b`](00bc43b167) unique debugger pin in Docker containers
- [`2cbdf2b`](2cbdf2b022) Merge pull request [#1542](https://github-redirect.dependabot.com/pallets/werkzeug/issues/1542) from asottile/exceptions_arent_always_hashable
- [`0e669f6`](0e669f6be5) Fix unhashable exception types
- [`bdc17e4`](bdc17e4cd1) Merge pull request [#1540](https://github-redirect.dependabot.com/pallets/werkzeug/issues/1540) from pallets/break-tb-cycle
- [`44e38c2`](44e38c2985) break cycle in chained exceptions
- [`777500b`](777500b646) Merge pull request [#1518](https://github-redirect.dependabot.com/pallets/werkzeug/issues/1518) from NiklasMM/fix/1510_lint-middleware-python3-compa...
- [`e00c7c2`](e00c7c2ced) Make LintMiddleware Python 3 compatible and add tests
- [`d590cc7`](d590cc7cf2) Merge pull request [#1539](https://github-redirect.dependabot.com/pallets/werkzeug/issues/1539) from pallets/profiler-format
- [`0388fc9`](0388fc95e6) update filename_format for ProfilerMiddleware.
- Additional commits viewable in [compare view](https://github.com/pallets/werkzeug/compare/0.15.2...0.15.3)
</details>
<br />
[](https://help.github.com/articles/configuring-automated-security-fixes)
Dependabot will resolve any conflicts with this PR as long as you don't alter it yourself. You can also trigger a rebase manually by commenting `@dependabot rebase`.
[//]: # (dependabot-automerge-start)
[//]: # (dependabot-automerge-end)
---
<details>
<summary>Dependabot commands and options</summary>
<br />
You can trigger Dependabot actions by commenting on this PR:
- `@dependabot rebase` will rebase this PR
- `@dependabot recreate` will recreate this PR, overwriting any edits that have been made to it
- `@dependabot merge` will merge this PR after your CI passes on it
- `@dependabot squash and merge` will squash and merge this PR after your CI passes on it
- `@dependabot cancel merge` will cancel a previously requested merge and block automerging
- `@dependabot reopen` will reopen this PR if it is closed
- `@dependabot ignore this [patch|minor|major] version` will close this PR and stop Dependabot creating any more for this minor/major version (unless you reopen the PR or upgrade to it yourself)
- `@dependabot ignore this dependency` will close this PR and stop Dependabot creating any more for this dependency (unless you reopen the PR or upgrade to it yourself)
- `@dependabot use these labels` will set the current labels as the default for future PRs for this repo and language
- `@dependabot use these reviewers` will set the current reviewers as the default for future PRs for this repo and language
- `@dependabot use these assignees` will set the current assignees as the default for future PRs for this repo and language
- `@dependabot use this milestone` will set the current milestone as the default for future PRs for this repo and language
You can disable automated security fix PRs for this repo from the [Security Alerts page](https://github.com/Mailu/Mailu/network/alerts).
</details>
Co-authored-by: dependabot[bot] <49699333+dependabot[bot]@users.noreply.github.com>
1211: Split HOST_ANTISPAM in HOST_ANTISPAM_MILTER and HOST_ANTISPAM_WEBUI r=mergify[bot] a=micw
## What type of PR?
bug-fix
## What does this PR do?
Fixes#1190 by separating HOST_ANTISPAM into HOST_ANTISPAM_MILTER and HOST_ANTISPAM_WEBUI
### Related issue(s)
- closes#1190
- closes#1150
## Prerequistes
Before we can consider review and merge, please make sure the following list is done and checked.
If an entry in not applicable, you can check it or remove it from the list.
- [ ] In case of feature or enhancement: documentation updated accordingly
- [x] Unless it's docs or a minor change: add [changelog](https://mailu.io/master/contributors/guide.html#changelog) entry file.
Co-authored-by: Michael Wyraz <michael@wyraz.de>
1198: Enable access log of admin service only for log levels of INFO and finer r=muhlemmer a=micw
## What type of PR?
bug fix
## What does this PR do?
### Related issue(s)
- closes#1197
## Prerequistes
- [x] Unless it's docs or a minor change: add [changelog](https://mailu.io/master/contributors/guide.html#changelog) entry file.
1204: Add initial admin account to kubernetes example r=muhlemmer a=micw
## What type of PR?
documentation
## What does this PR do?
Add INITIAL_ADMIN_* example to kubernetes configmap.yaml
### Related issue(s)
- closes#1201
## Prerequistes
Before we can consider review and merge, please make sure the following list is done and checked.
If an entry in not applicable, you can check it or remove it from the list.
- docs example only
1207: Add Japanese translation r=muhlemmer a=IchikawaYukko
## What type of PR?
Translation
## What does this PR do?
Provide completed Japanese translation.
### Related issue(s)
None
## Prerequistes
Before we can consider review and merge, please make sure the following list is done and checked.
If an entry in not applicable, you can check it or remove it from the list.
- [*] In case of feature or enhancement: documentation updated accordingly
- [*] Unless it's docs or a minor change: add [changelog](https://mailu.io/master/contributors/guide.html#changelog) entry file.
1208: Persist mailqueue r=muhlemmer a=micw
## What type of PR?
bug-fix
## What does this PR do?
Makes postfix mailqueue presistent (for docker, swarm and kubernetes)
### Related issue(s)
- closes#1161
## Prerequistes
Before we can consider review and merge, please make sure the following list is done and checked.
If an entry in not applicable, you can check it or remove it from the list.
- [x] Unless it's docs or a minor change: add [changelog](https://mailu.io/master/contributors/guide.html#changelog) entry file.
Co-authored-by: Michael Wyraz <michael@wyraz.de>
Co-authored-by: Michael Wyraz <michael.wyraz@evermind.de>
Co-authored-by: U-COREI3-3120M\市川ゆり子 <ichikawayuriko@yahoo.co.jp>
Co-authored-by: micw <michael@wyraz.de>
1181: Update to address issue #1178 (HTTP headers) r=muhlemmer a=bladeswords
This change should remove the duplicate `x-xss-protection` header and also the `x-powered-by` header. Hopefully a pull request to main is appropriate, but may be worth back porting to 1.7.
Tested config by modifying live 1.7 nginx config and reloading. Has had the desired outcome of removing the headers.
```/etc/nginx # nginx -t -c /etc/nginx/nginx.conf
nginx: the configuration file /etc/nginx/nginx.conf syntax is ok
nginx: configuration file /etc/nginx/nginx.conf test is successful
/etc/nginx # nginx -s reload
```
These steps were based on:
- https://serverfault.com/questions/928912/how-do-i-remove-a-server-added-header-from-proxied-location
- https://serverfault.com/questions/929571/overwrite-http-headers-comming-back-from-a-web-application-server-proxied-in-ngi
- http://nginx.org/en/docs/http/ngx_http_proxy_module.html#proxy_hide_header
## What type of PR?
Enhancement
## What does this PR do?
Removes duplicate and unneeded headers. See issue #1178
### Related issue(s)
- issue: #1178
## Prerequistes
Before we can consider review and merge, please make sure the following list is done and checked.
If an entry in not applicable, you can check it or remove it from the list.
- [ X ] In case of feature or enhancement: documentation updated accordingly
- [ X ] Unless it's docs or a minor change: add [changelog](https://mailu.io/master/contributors/guide.html#changelog) entry file.
Co-authored-by: bladeswords <bladeswords@users.noreply.github.com>
1183: Fix rspamd-learn when moving mail from/to junk folder r=mergify[bot] a=Nebukadneza
Before, the ham/spam scripts got the rspamd-ip/port from the environment.
However, when checking the environment of these processes now, it seems
cleared. Maybe the new dovecot version now clears environment? — I couldn’t
find a hint.
In any case, using the common mechanism of injecting the ip/port from where
it’s definately known by the already-used jinja2-mechanism seems reasonably
safe.
## What type of PR?
bug-fix
## What does this PR do?
Instead of relying on dovecot passing our environment cleanly to sieve-called scripts, this explicitly injects the antispam ip/port into the spam/ham scripts used when moving files from/to the spam-folder. This required some management of the files, such as setting proper permissions after the jinja-run.
### Related issue(s)
fixes#1177
## Prerequistes
- [x] In case of feature or enhancement: documentation updated accordingly
- [x] Unless it's docs or a minor change: add [changelog](https://mailu.io/master/contributors/guide.html#changelog) entry file.
Co-authored-by: Dario Ernst <dario@kanojo.de>
Co-authored-by: Dario Ernst <dario.ernst@rommelag.com>
1196: Change default password scheme to PBKDF2 (#1194) r=mergify[bot] a=hoellen
## What type of PR?
enhancement
## What does this PR do?
This PR change the default password scheme to PBKDF2. It is already changed in some places (e.g. [docs/compose/.env](https://github.com/Mailu/Mailu/blob/master/docs/compose/.env#L142)).
### Related issue(s)
closes#1194
## Prerequistes
Before we can consider review and merge, please make sure the following list is done and checked.
If an entry in not applicable, you can check it or remove it from the list.
- [x] In case of feature or enhancement: documentation updated accordingly
- [x] Unless it's docs or a minor change: add [changelog](https://mailu.io/master/contributors/guide.html#changelog) entry file.
Co-authored-by: hoellen <dev@hoellen.eu>
1180: Add a title to Mailu-Admin pages r=mergify[bot] a=Niduroki
## What type of PR?
Enhancement
## What does this PR do?
This simply adds a title to be displayed in the browser tab for Mailu-Admin pages.
## Prerequistes
Before we can consider review and merge, please make sure the following list is done and checked.
If an entry in not applicable, you can check it or remove it from the list.
- [x] In case of feature or enhancement: documentation updated accordingly
- [x] Unless it's docs or a minor change: add [changelog](https://mailu.io/master/contributors/guide.html#changelog) entry file.
Considering this is only a one-line change I don't think these apply.
-----
I made the title `Mailu-Admin - SITENAME` – if this seems unfitting feel free to change it to something different.
Co-authored-by: Niduroki <chris@niduroki.net>
1158: Use nginx for kubernetes ingress r=kaiyou a=micw
## What type of PR?
enhancement
## What does this PR do?
Currently, kubernetes uses a complex ingress setting which is not portable across different ingress controllers. This PR simplifies the ingress and delegates everythins special to Mailu to the front container,
### Related issue(s)
- closes#1121
- closes#1117
- closes#1021
- closes#1045
## Prerequistes
- [x] In case of feature or enhancement: documentation updated accordingly
- [x] Unless it's docs or a minor change: add [changelog]
Co-authored-by: Michael Wyraz <michael@wyraz.de>
Before, the ham/spam scripts got the rspamd-ip/port from the environment.
However, when checking the environment of these processes now, it seems
cleared. Maybe the new dovecot version now clears environment? — I couldn’t
find a hint.
In any case, using the common mechanism of injecting the ip/port from where
it’s definately known by the already-used jinja2-mechanism seems reasonably
safe.
1114: Resolve HOST to ADDRESS only if ADDRESS is not already set r=mergify[bot] a=micw
## What type of PR?
bug-fix
## What does this PR do?
~Makes the rsolving from hosts to ips at startup configurable~
I rewrote the pull request after #940 was merged. Now it resolves HOSTs to ADDRESSes only of ADDRESSes are not already set. So on kubernetes we can jsut set the address and have working service discovery.
### Related issue(s)
- closes#1113
## Prerequistes
~Minor change, backward compatible~
Changelog will be added
Co-authored-by: Michael Wyraz <michael@wyraz.de>
1130: Remove unnecessary host variable assignments r=mergify[bot] a=kaiyou
## What type of PR?
Bug fix
## What does this PR do?
### Related issue(s)
- Closes#1126
## Prerequistes
Before we can consider review and merge, please make sure the following list is done and checked.
If an entry in not applicable, you can check it or remove it from the list.
- [ ] In case of feature or enhancement: documentation updated accordingly
- [ ] Unless it's docs or a minor change: add [changelog](https://mailu.io/master/contributors/guide.html#changelog) entry file.
1132: Release Mailu 1.7 r=mergify[bot] a=kaiyou
## What type of PR?
Release
## What does this PR do?
It provides the changelog and migration notes for release 1.7.
### Related issue(s)
## Prerequistes
Before we can consider review and merge, please make sure the following list is done and checked.
If an entry in not applicable, you can check it or remove it from the list.
- [x] In case of feature or enhancement: documentation updated accordingly
- [x] Unless it's docs or a minor change: add [changelog](https://mailu.io/master/contributors/guide.html#changelog) entry file.
Co-authored-by: kaiyou <pierre@jaury.eu>
940: Fix host variables r=mergify[bot] a=ionutfilip
## What type of PR?
bug-fix
## What does this PR do?
### Related issue(s)
- Fix#884
## Prerequistes
Before we can consider review and merge, please make sure the following list is done and checked.
If an entry in not applicable, you can check it or remove it from the list.
- [x] In case of feature or enhancement: documentation updated accordingly
- [x] Unless it's docs or a minor change: place entry in the [changelog](CHANGELOG.md), under the latest un-released version.
Co-authored-by: Ionut Filip <ionut.philip@gmail.com>
Co-authored-by: Tim Möhlmann <muhlemmer@gmail.com>
883: Admin create user enhancement r=mergify[bot] a=cr1st1p
## What type of PR?
Enhancement
## What does this PR do?
It allows the admin docker image to also create the admin user.
The idea is that in my kubernetes setup, I do not want to manually do anything, as such, I need a way for the admin user to also be created automatically without me getting inside the pod.
So I had to change the manage.py function that creates the user to allow different 'modes' (me, I'll be using 'ifmissing') and also start.py to call that functionality if appropriate environment variables are present.
So now, in my Deployment, I add 3 more environment variables and I get the admin user created, IF not already present.
### Related issue(s)
none?
## Prerequistes
Before we can consider review and merge, please make sure the following list is done and checked.
If an entry in not applicable, you can check it or remove it from the list.
- [x] In case of feature or enhancement: documentation updated accordingly
- [x] Unless it's docs or a minor change: place entry in the [changelog](CHANGELOG.md), under the latest un-released version.
Co-authored-by: cristi <cristi.posoiu@gmail.com>
Co-authored-by: cr1st1p <cristi.posoiu@gmail.com>
Co-authored-by: Tim Möhlmann <muhlemmer@gmail.com>
1088: Support domain literals (fix#1087) r=mergify[bot] a=hoellen
## What type of PR?
bug-fix
## What does this PR do?
This PR adds error handling for idna enocding. With telnet you now get a "Bad sender address syntax" message.
```
> telnet mail.example.com 25
Connected to example.com.
Escape character is '^]'.
220 mail.example.com ESMTP ready
EHLO dummy.example.com
250-mail.example.com
250 STARTTLS
MAIL FROM: does-not-exist@[116.203.165.200]
250 2.0.0 OK
RCPT TO: some-user@example.com
501 5.1.7 Bad sender address syntax
Connection closed by foreign host.
```
### Related issue(s)
fix#1087
## Prerequistes
Before we can consider review and merge, please make sure the following list is done and checked.
If an entry in not applicable, you can check it or remove it from the list.
- [x] In case of feature or enhancement: documentation updated accordingly
- [x] Unless it's docs or a minor change: add [changelog](https://mailu.io/master/contributors/guide.html#changelog) entry file.
Co-authored-by: hoellen <dev@hoellen.eu>
1052: Upgrade alpine to 3.10 r=mergify[bot] a=Nebukadneza
## What type of PR?
enhancement / bug-fix
## What does this PR do?
Upgrade the alpine base image to 3.10 and clean up ensuing problems. Also directly uses postfix foreground-running with stdout logging.
### Related issue(s)
closes#1049closes#1051
Note: This is a duplicate effort of #1050#1039 …
## Prerequistes
- [X] In case of feature or enhancement: documentation updated accordingly
- [X] Unless it's docs or a minor change: add [changelog](https://mailu.io/master/contributors/guide.html#changelog) entry file.
With these images, I have tested manually:
- Email receive to user
- on main domain
- on additional domain
- via an alias on main-domain
- via an alias on additional domain
- via catchall
- Email reject
- of eicar testfiles
- Email sending
- Fetchmail from legacy POP
- Front LE certificates
- Simple overriding for postfix (only postfix.cf), nginx, dovecot, rspamd
- Creating a CalDAV calendar and CardDAV entry using davx5
I have not (yet) tested:
- certdumper
- databases other than sqlite
Todo:
- [x] Get rid of podop at `git+https://github.com/Nebukadneza/Podop.git@fix_py37` once https://github.com/Mailu/Podop/pull/6 is merged
- [x] Bend Mailustart back to original repository
- [x] Test more (? also help wanted ?)
Co-authored-by: Thomas Sänger <thomas@gecko.space>
Co-authored-by: Dario Ernst <dario@kanojo.de>
Co-authored-by: Reto Glauser <git@blinkeye.ch>
dependabot[bot]