2468: Ensure that Mailu keeps working even if it can't obtain a certificate from LE r=mergify[bot] a=nextgens
## What type of PR?
bug-fix
## What does this PR do?
Ensure that Mailu keeps working even if it can't obtain a certificate from letsencrypt for one of the HOSTNAMES
Without this TLS configuration would fail and Mailu would operate without TLS completely.
I haven't tested it but thought this used to work previously... maybe certbot has changed something
### Related issue(s)
- closes#2467
## Prerequisites
Before we can consider review and merge, please make sure the following list is done and checked.
If an entry in not applicable, you can check it or remove it from the list.
- [x] In case of feature or enhancement: documentation updated accordingly
- [x] Unless it's docs or a minor change: add [changelog](https://mailu.io/master/contributors/workflow.html#changelog) entry file.
Co-authored-by: Florent Daigniere <nextgens@freenetproject.org>
2455: Fix/missing tanslations r=mergify[bot] a=DjVinnii
## What type of PR?
Fix/Enhancement
## What does this PR do?
Add missing Dutch translation, as well as the German translation for `Start of vacation`
### Related issue(s)
- closes#2217
## Prerequisites
Before we can consider review and merge, please make sure the following list is done and checked.
If an entry in not applicable, you can check it or remove it from the list.
- [ ] In case of feature or enhancement: documentation updated accordingly
- [ ] Unless it's docs or a minor change: add [changelog](https://mailu.io/master/contributors/workflow.html#changelog) entry file.
Co-authored-by: Vincent Kling <v.kling@vinniict.nl>
Co-authored-by: Alexander Graf <ghostwheel42@users.noreply.github.com>
Co-authored-by: Dimitri Huisman <diman@huisman.xyz>
2448: Give a chance to rspamd's bayes classifier r=mergify[bot] a=nextgens
## What type of PR?
bug-fix + documentation
## What does this PR do?
As pointed out in #2442, the bayesian filter of rspamd doesn't get any chance to run as ``min_learns`` is set to 200 and we never teach it any HAM.
This PR enables rspamd's autolearn feature, that will "reinforce" good/bad by learning from the scoring of other modules. It ensures both that we will eventually reach the 200 mark but also that the data stays fresh.
I've also taken this opportunity to update the documentation & FAQ accordingly, to ensure that users teach their HAM & SPAM to both the fuzzy and bayes classifiers.
Thank you to [woj-tek](https://github.com/woj-tek) for doing the ground work on this.
### Related issue(s)
- closes#2442
## Prerequisites
Before we can consider review and merge, please make sure the following list is done and checked.
If an entry in not applicable, you can check it or remove it from the list.
- [x] In case of feature or enhancement: documentation updated accordingly
- [x] Unless it's docs or a minor change: add [changelog](https://mailu.io/master/contributors/workflow.html#changelog) entry file.
Co-authored-by: Florent Daigniere <nextgens@freenetproject.org>
This new advanced setting to harden cipher configuration on port 25. Changing the default is strongly discouraged, please read the documentation before doing so.
2440: The ARM wheels don't work r=mergify[bot] a=nextgens
## What type of PR?
bug-fix
## What does this PR do?
Remove piwheels to ensure we always rebuild on ARM
### Related issue(s)
- closes#2439
- #1200
Co-authored-by: Florent Daigniere <nextgens@freenetproject.org>
Antispam.rst contained a syntax error.
Move config description to common section which is more fitting.
Fixed wrong assignment of default value for DEFAULT_SPAM_THRESHOLD in models.py.
2403: Feature: switch CI/CD from build to buildx r=mergify[bot] a=Diman0
## What type of PR?
Feature and enhancement
## What does this PR do?
Switch from docker build to buildx for CI/CD.
- The main workflow file has been optimised and simplified.
- Images are built in parallel when building locally resulting in much faster build times.
- The github action workflow is about 50% faster.
- Arm images are built as well. These images are not tested due to restrictions of github actions (no arm runners). The tags of the images have -arm appended to it. The arm images are built on merge on master and release branch (x.y). They do not influence the normal CI/CD workflow used for bors (for PR) and real releases (merge on master and branch x.y for x86_64).
- Arm images (and normal x86_64 images) can also be built locally.
- Reusable workflow is introduced for building, testing and deploying the images. This allows the workflow to be reused for other purposes in the future.
- Workflow can be manually triggered. This allows forked Mailu projects to also use the workflow for building images.
The main workflow makes use of github actions cache to store the cache layer. This layer is used to quickly rebuilt the images in the testing step and deploy step.
Unfortunately the building the arm images fails sometimes due to timeouts. Sometimes the connection to github actions cache is very slow. Restarting the workflow from the last failed step resolves this. I have not observed this with the normal build.
Just as previous time, you can use a forked project for testing the changes (https://github.com/Diman0/Mailu_Fork). You should still have owner access. I have created branch 1.11 for testing. You can see I already push 4 times to branch 1.11 (current version is 1.11.3).
### Related issue(s)
- Mention an issue like: #001
- closes#2383
- closes#1830
- closes#1200
## Prerequisites
Before we can consider review and merge, please make sure the following list is done and checked.
If an entry in not applicable, you can check it or remove it from the list.
- [x] In case of feature or enhancement: documentation updated accordingly
- [x] Unless it's docs or a minor change: add [changelog](https://mailu.io/master/contributors/workflow.html#changelog) entry file.
Co-authored-by: Dimitri Huisman <diman@huisman.xyz>
2221: Add support for custom NGINX config r=mergify[bot] a=easybe
## What type of PR?
enhancement
## What does this PR do?
Add support for custom NGINX config. Including *.conf files in /etc/nginx/conf.d same as the default NGINX configuration gives the user more flexibility.
### Related issue(s)
## Prerequisites
Before we can consider review and merge, please make sure the following list is done and checked.
If an entry in not applicable, you can check it or remove it from the list.
- [ ] In case of feature or enhancement: documentation updated accordingly
- [x] Unless it's docs or a minor change: add [changelog](https://mailu.io/master/contributors/workflow.html#changelog) entry file.
Co-authored-by: Ezra Buehler <ezra@easyb.ch>
2357: Switch to ffdhe3072 to enable RFC 7919 r=mergify[bot] a=nextgens
## What type of PR?
enhancement
## What does this PR do?
The idea being:
- it's a "nothing up my sleeves" group
- it may help shave off some bytes of the SSL handshake; That being said, I doubt that clients that are modern enough to support this RFC won't offer an EC kex
https://raw.githubusercontent.com/internetstandards/dhe_groups/master/ffdhe3072.pem
## Prerequisites
Before we can consider review and merge, please make sure the following list is done and checked.
If an entry in not applicable, you can check it or remove it from the list.
- [ ] In case of feature or enhancement: documentation updated accordingly
- [x] Unless it's docs or a minor change: add [changelog](https://mailu.io/master/contributors/workflow.html#changelog) entry file.
Co-authored-by: Florent Daigniere <nextgens@freenetproject.org>
2404: Forwarding emails option in user settings did not support 1 letter do… r=mergify[bot] a=Diman0
…mains.
## What type of PR?
Bug-fix
## What does this PR do?
Forwarding emails option in user setting did not support 1 letter domains. The regex for checking the validity of multiple email addresses string has been modified to allow 1 letter domains and to allow 1 letter local part.
### Related issue(s)
- closes#2402
## Prerequisites
Before we can consider review and merge, please make sure the following list is done and checked.
If an entry in not applicable, you can check it or remove it from the list.
- [n/a] In case of feature or enhancement: documentation updated accordingly
- [x] Unless it's docs or a minor change: add [changelog](https://mailu.io/master/contributors/workflow.html#changelog) entry file.
Co-authored-by: Dimitri Huisman <diman@huisman.xyz>
2397: Fix resolving alias addresses for postfix when target is a punycode domain r=mergify[bot] a=ghostwheel42
## What type of PR?
bug-fix
## What does this PR do?
- fix splitting of localpart in resolve_destination
- idna-enode domain-part of email addresses before returning to postfix
### Related issue(s)
- closes#2393
Co-authored-by: Alexander Graf <ghostwheel42@users.noreply.github.com>
- The main workflow file has been optimised and simplified.
- Images are built in parallel when building locally resulting in faster build times.
- The github action workflow is about 50% faster.
- Arm images are built as well. These images are not tested due to restrictions of github actions (no arm runners). The tags of the images have -arm appended to it.
- Arm images can also be built locally.
- Reusable workflow is introduced for building, testing and deploying the images.
This allows the workflow to be reused for other purposes in the future.
- Workflow can be manually triggered. This allows forked Mailu projects to also use the workflow for building images.
Remove unneeded IF statement in /admin block in nginx.conf of front.
Fix contributions made to Dockerfile, add missing trailing \ and add back curl
Change healthcheck to monitoring page of fpm. Now we check nginx and fpm.
This is required for passing rDNS/ptr information to postfix.
The mail proxy uses the resolver info for passing XCLIENT info.
See http://nginx.org/en/docs/mail/ngx_mail_proxy_module.html#xclient
Without this info rspamd will flag all messages with DHFILTER_HOSTNAME_UNKNOWN due to the missing rDNS/ptr info.
Per requested changes added the ``DEFAULT_SPAM_THRESHOLD`` to the main
application configuration dictionary in ``configuration.py`` and updated
``models.py`` accordingly.
No error handling is added, as that was not required.
This commit adds functionality to set a custom default spam threshold
for new users. The environment variable ``DEFAULT_SPAM_THRESHOLD`` can
be used for this purpose. When not set, it defaults back to 80%, as the
default value was before
If ``DEFAULT_SPAM_THRESHOLD`` is set to a value that Python cannot
parse as an integer, a ValueError is thrown. There is no error handling
for that case built-in.
2325: postfix: wrap IPv6 CIDRs in square brackets for RELAYNETS r=mergify[bot] a=pommi
## What type of PR?
bug-fix
## What does this PR do?
This PR wraps IPv6 CIDRs in the `RELAYNETS` environment variable in square brackets for the postfix configuration.
The `RELAYNETS` environment variable is used for configuring both postfix `mynetworks` and rspamd `local_networks`. Postfix requires IPv6 addresses to be wrapped in square brackets (eg. `[2001:db8::]/64`).
When an IPv6 address is not wrapped in square brackets in the postfix configuration for `mynetworks` it results in this error while processing an incoming email from an IPv6 sender:
```
postfix/smtpd[340]: warning: 2001:db8::/64 is unavailable. unsupported dictionary type: 2001
postfix/smtpd[340]: warning: smtpd_client_event_limit_exceptions: 2001:db8::/64: table lookup problem
```
The sender sees an error and the incoming email is refused:
```
451 4.3.0 <unknown[2001:xxx:xxx:xxx:xxx:xxx:xxx:xxx]>: Temporary lookup failure
```
I tried to work around this issue by wrapping the IPv6 CIDR in square brackets in the `RELAYNETS` environment variable, but it segfaults rspamd, because it can't deal with this non-standard IPv6 notation used by postfix:
```
kernel: [4305632.603704] rspamd[1954299]: segfault at 0 ip 00007fb848983871 sp 00007ffe02cc6d1
8 error 4 in ld-musl-x86_64.so.1[7fb848948000+48000]
```
### Related issue(s)
- #2293
- #2272
## Prerequisites
Before we can consider review and merge, please make sure the following list is done and checked.
If an entry in not applicable, you can check it or remove it from the list.
**No changelog or documentation necessary for this minor change.**
Co-authored-by: Pim van den Berg <pim@nethuis.nl>
The RELAYNETS environment variable is used for configuring both postfix
`mynetworks` and rspamd `local_networks`. Postfix requires IPv6
addresses to be wrapped in square brackets (eg. [2001:db8::]/64).
2310: Update deprecated rspamd config option r=mergify[bot] a=henniaufmrenni
## What type of PR?
Configuration update
## What does this PR do?
This is just a small config update to get rid of the following warning message:
`lua; antivirus.lua:109: CLAM_VIRUS [clamav]: Using attachments_only is deprecated. Please use scan_mime_parts = true instead`
As per the rspamd documentation https://rspamd.com/doc/modules/antivirus.html
> attachments_only = true; # Before 1.8.1
> scan_mime_parts = true; # After 1.8.1
The currently used version of rspamd is 3.1.
## Prerequisites
Before we can consider review and merge, please make sure the following list is done and checked.
If an entry in not applicable, you can check it or remove it from the list.
- [x] In case of feature or enhancement: documentation updated accordingly
- [x] Unless it's docs or a minor change: add [changelog](https://mailu.io/master/contributors/workflow.html#changelog) entry file.
Co-authored-by: henniaufmrenni <henniaufmrenni@keinvergessen.org>
2338: Update X-XSS-Protection to current recommendation r=mergify[bot] a=AvverbioPronome
See:
- https://developer.mozilla.org/en-US/docs/Web/HTTP/Headers/X-XSS-Protection and
- https://cheatsheetseries.owasp.org/cheatsheets/HTTP_Headers_Cheat_Sheet.html#x-xss-protection
## What type of PR?
Slight enhancement
## What does this PR do?
This PR turns off the XSS auditor in the few browsers that still have one.
## Prerequisites
Before we can consider review and merge, please make sure the following list is done and checked.
If an entry in not applicable, you can check it or remove it from the list.
- [ ?] In case of feature or enhancement: documentation updated accordingly
- [x ] Unless it's docs or a minor change: add [changelog](https://mailu.io/master/contributors/workflow.html#changelog) entry file.
Co-authored-by: Giuseppe C <1191978+AvverbioPronome@users.noreply.github.com>
Co-authored-by: Your Name <you@example.com>
2323: Fix Postfix FileExistsError on startup r=mergify[bot] a=Pumba98
## What type of PR?
bug-fix
## What does this PR do?
I'm running mailu with the mailu helm-chart on kubernetes. Sometimes when a Pod restarts I get the following error during startup:
```
Process Process-1:
Traceback (most recent call last):
File "/usr/lib/python3.9/multiprocessing/process.py", line 315, in _bootstrap
self.run()
File "/usr/lib/python3.9/multiprocessing/process.py", line 108, in run
self._target(*self._args, **self._kwargs)
File "/start.py", line 18, in start_podop
os.mkdir('/dev/shm/postfix',mode=0o700)
FileExistsError: [Errno 17] File exists: '/dev/shm/postfix'
INFO:MAIN:MTA-STS daemon starting...
```
But that does not prevent the container startup. When mails arrive it will fail with something like:
```
postfix/trivial-rewrite[94979]: warning: connect to /tmp/podop.socket: No such file or directory
postfix/trivial-rewrite[94979]: warning: table socketmap:unix:/tmp/podop.socket:transport lookup error: No such file or directory
postfix/trivial-rewrite[94979]: warning: socketmap:unix:/tmp/podop.socket:transport lookup error for "*"
```
I'm running this quick fix now since almost two months without problems. Maybe you got a better approach how to solve this, but this works fine for me.
### Related issue(s)
- none
## Prerequisites
Before we can consider review and merge, please make sure the following list is done and checked.
If an entry in not applicable, you can check it or remove it from the list.
<!--
- [ ] In case of feature or enhancement: documentation updated accordingly
- [ ] Unless it's docs or a minor change: add [changelog](https://mailu.io/master/contributors/workflow.html#changelog) entry file.
--->
**No changelog or documentation necessary for this minor change.**
Co-authored-by: Pumba98 <mail@pumba98.de>
Co-authored-by: Florent Daigniere <nextgens@users.noreply.github.com>
This gets rid of the following error message:
lua; antivirus.lua:109: CLAM_VIRUS [clamav]: Using attachments_only is deprecated. Please use scan_mime_parts = true instead
As per the rspamd documentation https://rspamd.com/doc/modules/antivirus.html
attachments_only = true; # Before 1.8.1
scan_mime_parts = true; # After 1.8.1
The currently used version is rspamd 3.1.
2302: Update alpine-linux to 3.14.5 - Zlib security FIX r=mergify[bot] a=willofr
## What type of PR?
Security fix
## What does this PR do?
Update alpine docker image to alpine-3.14.5
- closes#2291
## Prerequisites
Before we can consider review and merge, please make sure the following list is done and checked.
If an entry in not applicable, you can check it or remove it from the list.
- [x] Unless it's docs or a minor change: add [changelog](https://mailu.io/master/contributors/workflow.html#changelog) entry file.
Co-authored-by: Will <will@packer-output-c8fcfb40-3d93-4475-8f87-e14a9dd683b6>
2276: Autoconfig of email clients r=mergify[bot] a=nextgens
## What type of PR?
Feature
## What does this PR do?
It provides auto-configuration templates for email clients and encourages them to use implicit TLS (see https://nostarttls.secvuln.info/)
There are numerous caveats:
- it will only work if suitable DNS records are created and certificates obtained (autoconfig, autodiscover, ...)
- the mobileconfig file isn't signed
- the credentials will be prompted... we could/should provision a token on each request instead
- it currently doesn't advertise caldav
- it's IMAP only
### Related issue(s)
- close#224
## Prerequisites
Before we can consider review and merge, please make sure the following list is done and checked.
If an entry in not applicable, you can check it or remove it from the list.
- [x] In case of feature or enhancement: documentation updated accordingly
- [x] Unless it's docs or a minor change: add [changelog](https://mailu.io/master/contributors/workflow.html#changelog) entry file.
Co-authored-by: Florent Daigniere <nextgens@freenetproject.org>
2281: Update alpine-linux to 3.14.4 - OpenSSL security FIX r=mergify[bot] a=willofr
## What type of PR?
Security fix
## What does this PR do?
Update Dockerfiles to use alpine-linux 3.14.4 which contains a security fix for openssl
https://alpinelinux.org/posts/Alpine-3.12.10-3.13.8-3.14.4-released.html
## Prerequisites
Before we can consider review and merge, please make sure the following list is done and checked.
If an entry in not applicable, you can check it or remove it from the list.
- [x] Unless it's docs or a minor change: add [changelog](https://mailu.io/master/contributors/workflow.html#changelog) entry file.
2285: Update names of language json files r=mergify[bot] a=ghostwheel42
## What type of PR?
bug-fix
## What does this PR do?
language json files of datatables i18n have been renamed
this updates the mappings to the current names
2286: Fix typo in Traefik reverse proxy docs r=mergify[bot] a=ghostwheel42
Slight typo in the Traefik reverse proxy docs. Found through running into the issue on my own instance.
## What type of PR?
documentation
## What does this PR do?
Adds #2282 to master
2287: Fix typo in docs: cert not certs r=mergify[bot] a=ghostwheel42
## What type of PR?
documentation
## What does this PR do?
just a typo
Co-authored-by: Will <will@packer-output-c8fcfb40-3d93-4475-8f87-e14a9dd683b6>
Co-authored-by: willofr <willofr@users.noreply.github.com>
Co-authored-by: Alexander Graf <ghostwheel42@users.noreply.github.com>
Co-authored-by: DAHPr0gram3r <cbillwork02@gmail.com>
2284: Fixing AUTH_RATELIMIT_IP not working on imap/pop3/smtp r=mergify[bot] a=fischerscode
#2283
## What type of PR?
bug-fix
## What does this PR do?
This fixes AUTH_RATELIMIT_IP not working on imap/pop3/smtp.
### Related issue(s)
closes#2283
## Prerequisites
Before we can consider review and merge, please make sure the following list is done and checked.
If an entry in not applicable, you can check it or remove it from the list.
- [x] Unless it's docs or a minor change: add [changelog](https://mailu.io/master/contributors/workflow.html#changelog) entry file.
Co-authored-by: Maximilian Fischer <github@maaeps.de>
Co-authored-by: Alexander Graf <ghostwheel42@users.noreply.github.com>
2255: Create a polite and turtle delivery queue to accommodate destinations that expect emails to be sent slowly r=mergify[bot] a=nextgens
## What type of PR?
Feature
## What does this PR do?
Create a polite and turtle delivery queue to accommodate destinations that expect emails to be sent slowly
### Related issue(s)
- closes#2213
## Prerequisites
Before we can consider review and merge, please make sure the following list is done and checked.
If an entry in not applicable, you can check it or remove it from the list.
- [x] In case of feature or enhancement: documentation updated accordingly
- [x] Unless it's docs or a minor change: add [changelog](https://mailu.io/master/contributors/workflow.html#changelog) entry file.
Co-authored-by: Florent Daigniere <nextgens@freenetproject.org>
2210: Add input validation for domain creation r=mergify[bot] a=0pc0deFR
## What type of PR?
bug-fix
## What does this PR do?
This patch add the input validation for domain creation.
### Related issue(s)
- Mention an issue like: #1817
- Auto close an issue like: closes#1817
Co-authored-by: Kevin Falcoz <0pc0defr@gmail.com>
Co-authored-by: Dimitri Huisman <diman@huisman.xyz>
2254: Send ISRG_X1 on port 25, make DANE pin that r=mergify[bot] a=nextgens
## What type of PR?
bug-fix
## What does this PR do?
Ensure we send ISRG_X1 in the handshake on port 25 (non-interactive, size doesn't really matter).
Update the DANE pin to reflect the change.
I am not sure whether we will need to add --preferred-chain= in the future; This may be the case when letsencrypt decides to use X2/the ECDSA chain
This needs to be tested on a letsencrypt account that isn't mine (I'm opted in for the alternate cert chains)
### Related issue(s)
- closes#2138
## Prerequisites
Before we can consider review and merge, please make sure the following list is done and checked.
If an entry in not applicable, you can check it or remove it from the list.
There's already a towncrier news for it
Co-authored-by: Florent Daigniere <nextgens@freenetproject.org>
Alexander Graf