@ -8,7 +8,7 @@ How does spam filtering work in Mailu?
Mailu uses Rspamd for spam filtering. Rspamd is a Fast, free and open-source spam filtering system.
Mailu uses Rspamd for spam filtering. Rspamd is a Fast, free and open-source spam filtering system.
Rspamd rejects non-compliant email messages and email messages that contain virusses. In Mailu Rspamd uses a scoring scale from 0 to 15. The following values are the default values, and can be changed inside the Rspamd webgui under the tab configuration:
Rspamd rejects non-compliant email messages and email messages that contain virusses. In Mailu Rspamd uses a scoring scale from 0 to 15. The following values are the default values, and can be changed inside the Rspamd WebUI under the tab configuration:
* Email messages with a score of 15 or higher will be rejected.
* Email messages with a score of 15 or higher will be rejected.
@ -52,7 +52,7 @@ The location in the administration web interface where the spam filter and spam
Can I learn ham/spam messages from an already existing mailbox?
Can I learn ham/spam messages from an already existing mailbox?
Mailu supports automatic spam learning for email messages moved to the Junk Folder. Any email messages moved to the Junk Folder will be re-learned as spam, any email moved from the Junk Folder to any other folder (but the thrash folder) will be re-learned as ham.
Mailu supports automatic spam learning for email messages moved to the Junk Folder. Any email messages moved to the Junk Folder will be re-learned as spam, any email moved from the Junk Folder to any other folder (but the trash folder) will be re-learned as ham.
If you already have an existing mailbox and want Mailu to learn them all as ham messages, you might run rspamc from within the dovecot container:
If you already have an existing mailbox and want Mailu to learn them all as ham messages, you might run rspamc from within the dovecot container:
If the address is not configured directly (NAT) on any of the network interfaces or if
If the address is not configured directly (NAT) on any of the network interfaces or if
you would simply like the server to listen on all interfaces, use ``0.0.0.0`` and ``::``. Note that running in this mode is not supported and can lead to `issues`_.
you would simply like the server to listen on all interfaces, use ``0.0.0.0`` and ``::``.
Note that running in this mode is not supported and can lead to `issues`_.
@ -107,6 +108,9 @@ Else, if you don't go with the automatic way, you need to manually create the ad
docker-compose exec admin flask mailu admin me example.net 'password'
docker-compose exec admin flask mailu admin me example.net 'password'
This will create a user named ``me@example.net`` with password ``password`` and administration privileges. Connect to the Web admin interface and change the password to a strong one.
This will create a user named ``me@example.net`` with password ``password`` and administration privileges.
Connect to the Web admin interface and change the password to a strong one.
..note:: It is vitally important that either a user with the same email as ``POSTMASTER`` in your ``mailu.env`` exists, or you remember to create an alias with this name after you log in. All kinds of strange errors will occur as a result of not doing so!
..note:: It is vitally important that either a user with the same email as ``POSTMASTER``
in your ``mailu.env`` exists, or you remember to create an alias with this name after you log in.
All kinds of strange errors will occur as a result of not doing so!
@ -37,7 +37,8 @@ The ``POSTMASTER`` is the local part of the postmaster email address. It is
recommended to setup a generic value and later configure a mail alias for that
recommended to setup a generic value and later configure a mail alias for that
address.
address.
The ``WILDCARD_SENDERS`` setting is a comma delimited list of user email addresses that are allowed to send emails from any existing address (spoofing the sender).
The ``WILDCARD_SENDERS`` setting is a comma delimited list of user email addresses
that are allowed to send emails from any existing address (spoofing the sender).
The ``AUTH_RATELIMIT_IP`` (default: 60/hour) holds a security setting for fighting
The ``AUTH_RATELIMIT_IP`` (default: 60/hour) holds a security setting for fighting
attackers that waste server resources by trying to guess user passwords (typically
attackers that waste server resources by trying to guess user passwords (typically
@ -60,7 +61,7 @@ CIDRs that won't be subject to any form of rate limiting. Specifying ``0.0.0.0/0
there is a good way to disable rate limiting altogether.
there is a good way to disable rate limiting altogether.
The ``TLS_FLAVOR`` sets how Mailu handles TLS connections. Setting this value to
The ``TLS_FLAVOR`` sets how Mailu handles TLS connections. Setting this value to
``notls`` will cause Mailu not to server any web content! More on :ref:`tls_flavor`.
``notls`` will cause Mailu not to serve any web content! More on :ref:`tls_flavor`.
Mail settings
Mail settings
-------------
-------------
@ -129,8 +130,10 @@ Web settings
- ``WEB_WEBMAIL`` contains the path to the Web email client.
- ``WEB_WEBMAIL`` contains the path to the Web email client.
- ``WEBROOT_REDIRECT`` redirects all non-found queries to the set path.
- ``WEBROOT_REDIRECT`` redirects all non-found queries to the set path.
An empty ``WEBROOT_REDIRECT`` value disables redirecting and enables classic behavior of a 404 result when not found.
An empty ``WEBROOT_REDIRECT`` value disables redirecting and enables
Alternatively, ``WEBROOT_REDIRECT`` can be set to ``none`` if you are using an Nginx override for ``location /``.
classic behavior of a 404 result when not found.
Alternatively, ``WEBROOT_REDIRECT`` can be set to ``none`` if you
are using an Nginx override for ``location /``.
All three options need a leading slash (``/``) to work.
All three options need a leading slash (``/``) to work.
@ -142,10 +145,12 @@ Both ``SITENAME`` and ``WEBSITE`` are customization options for the panel menu
in the admin interface, while ``SITENAME`` is a customization option for
in the admin interface, while ``SITENAME`` is a customization option for
every Web interface.
every Web interface.
- ``LOGO_BACKGROUND`` sets a custom background colour for the brand logo in the topleft of the main admin interface.
- ``LOGO_BACKGROUND`` sets a custom background colour for the brand logo
in the topleft of the main admin interface.
For a list of colour codes refer to this page of `w3schools`_.
For a list of colour codes refer to this page of `w3schools`_.
- ``LOGO_URL`` sets a URL for a custom logo. This logo replaces the Mailu logo in the topleft of the main admin interface.
- ``LOGO_URL`` sets a URL for a custom logo. This logo replaces the Mailu
@ -168,7 +173,8 @@ To have the account created automatically, you just need to define a few environ
- ``ifmissing``: creates a new admin account when the admin account does not exist.
- ``ifmissing``: creates a new admin account when the admin account does not exist.
- ``update``: creates a new admin account when it does not exist, or update the password of an existing admin account.
- ``update``: creates a new admin account when it does not exist, or update the password of an existing admin account.
Note: It is recommended to set ``INITIAL_ADMIN_MODE`` to either ``update`` or ``ifmissing``. Leaving it with the default value will cause an error when the system is restarted.
Note: It is recommended to set ``INITIAL_ADMIN_MODE`` to either ``update`` or ``ifmissing``. Leaving it with the
default value will cause an error when the system is restarted.
An example:
An example:
@ -184,11 +190,19 @@ Depending on your particular deployment you most probably will want to change th
Advanced settings
Advanced settings
-----------------
-----------------
The ``CREDENTIAL_ROUNDS`` (default: 12) setting is the number of rounds used by the password hashing scheme. The number of rounds can be reduced in case faster authentication is needed or increased when additional protection is desired. Keep in mind that this is a mitigation against offline attacks on password hashes, aiming to prevent credential stuffing (due to password re-use) on other systems.
The ``CREDENTIAL_ROUNDS`` (default: 12) setting is the number of rounds used by the
password hashing scheme. The number of rounds can be reduced in case faster
authentication is needed or increased when additional protection is desired.
Keep in mind that this is a mitigation against offline attacks on password hashes,
aiming to prevent credential stuffing (due to password re-use) on other systems.
The ``SESSION_COOKIE_SECURE`` (default: True) setting controls the secure flag on the cookies of the administrative interface. It should only be turned off if you intend to access it over plain HTTP.
The ``SESSION_COOKIE_SECURE`` (default: True) setting controls the secure flag on
the cookies of the administrative interface. It should only be turned off if you
intend to access it over plain HTTP.
``SESSION_TIMEOUT`` (default: 3600) is the maximum amount of time in seconds between requests before a session is invalidated. ``PERMANENT_SESSION_LIFETIME`` (default: 108000) is the maximum amount of time in seconds a session can be kept alive for if it hasn't timed-out.
``SESSION_TIMEOUT`` (default: 3600) is the maximum amount of time in seconds between
requests before a session is invalidated. ``PERMANENT_SESSION_LIFETIME`` (default: 108000)
is the maximum amount of time in seconds a session can be kept alive for if it hasn't timed-out.
The ``LOG_LEVEL`` setting is used by the python start-up scripts as a logging threshold.
The ``LOG_LEVEL`` setting is used by the python start-up scripts as a logging threshold.
Log messages equal or higher than this priority will be printed.
Log messages equal or higher than this priority will be printed.
@ -197,13 +211,20 @@ See the `python docs`_ for more information.
The ``LETSENCRYPT_SHORTCHAIN`` (default: False) setting controls whether we send the ISRG Root X1 certificate in TLS handshakes. This is required for `android handsets older than 7.1.1` but slows down the performance of modern devices.
The ``LETSENCRYPT_SHORTCHAIN`` (default: False) setting controls whether we send the
ISRG Root X1 certificate in TLS handshakes. This is required for `android handsets older than 7.1.1`
but slows down the performance of modern devices.
.._`android handsets older than 7.1.1`: https://community.letsencrypt.org/t/production-chain-changes/150739
.._`android handsets older than 7.1.1`: https://community.letsencrypt.org/t/production-chain-changes/150739
.._reverse_proxy_headers:
.._reverse_proxy_headers:
The ``REAL_IP_HEADER`` (default: unset) and ``REAL_IP_FROM`` (default: unset) settings controls whether HTTP headers such as ``X-Forwarded-For`` or ``X-Real-IP`` should be trusted. The former should be the name of the HTTP header to extract the client IP address from and the later a comma separated list of IP addresses designating which proxies to trust. If you are using Mailu behind a reverse proxy, you should set both. Setting the former without the later introduces a security vulnerability allowing a potential attacker to spoof his source address.
The ``REAL_IP_HEADER`` (default: unset) and ``REAL_IP_FROM`` (default: unset) settings
controls whether HTTP headers such as ``X-Forwarded-For`` or ``X-Real-IP`` should be trusted.
The former should be the name of the HTTP header to extract the client IP address from and the
later a comma separated list of IP addresses designating which proxies to trust.
If you are using Mailu behind a reverse proxy, you should set both. Setting the former without
the later introduces a security vulnerability allowing a potential attacker to spoof his source address.
The ``TZ`` sets the timezone Mailu will use. The timezone naming convention usually uses a ``Region/City`` format. See `TZ database name`_ for a list of valid timezones This defaults to ``Etc/UTC``. Warning: if you are observing different timestamps in your log files you should change your hosts timezone to UTC instead of changing TZ to your local timezone. Using UTC allows easy log correlation with remote MTAs.
The ``TZ`` sets the timezone Mailu will use. The timezone naming convention usually uses a ``Region/City`` format. See `TZ database name`_ for a list of valid timezones This defaults to ``Etc/UTC``. Warning: if you are observing different timestamps in your log files you should change your hosts timezone to UTC instead of changing TZ to your local timezone. Using UTC allows easy log correlation with remote MTAs.
@ -318,10 +339,13 @@ Mail log settings
By default, all services log directly to stdout/stderr. Logs can be collected by any docker log processing solution.
By default, all services log directly to stdout/stderr. Logs can be collected by any docker log processing solution.
Postfix writes the logs to a syslog server which logs to stdout. This is used to filter out messages from the healthcheck.
Postfix writes the logs to a syslog server which logs to stdout. This is used to filter
In some situations, a separate mail log is required (e.g. for legal reasons). The syslog server can be configured to write log files to a volume. It can be configured with the following option:
out messages from the healthcheck. In some situations, a separate mail log is required
(e.g. for legal reasons). The syslog server can be configured to write log files to a volume.
It can be configured with the following option:
- ``POSTFIX_LOG_FILE``: The file to log the mail log to. When enabled, the syslog server will also log to stdout.
- ``POSTFIX_LOG_FILE``: The file to log the mail log to. When enabled, the syslog server will also log to stdout.
When ``POSTFIX_LOG_FILE`` is enabled, the logrotate program will automatically rotate the logs every week and keep 52 logs.
When ``POSTFIX_LOG_FILE`` is enabled, the logrotate program will automatically rotate the
To override the logrotate configuration, create the file logrotate.conf with the desired configuration in the :ref:`Postfix overrides folder<override-label>`.
logs every week and keep 52 logs. To override the logrotate configuration, create the file logrotate.conf
with the desired configuration in the :ref:`Postfix overrides folder<override-label>`.
@ -80,8 +80,8 @@ In ``pg_hba.conf`` there should be a line like this:
host mailu mailu <mailu_host>/32 md5
host mailu mailu <mailu_host>/32 md5
Note that this example is the bare-minimum to get Mailu working. It goes without saying that
Note that this example is the bare-minimum to get Mailu working. Additional work needs to be
the database admin will have to setup his own means of backups and TLS encrypted connections.
done by the database admin to setup their own means of backups and TLS encrypted connections.
Nowadays it is recommended to use the official PostgreSQL image from the PostgreSQL community. The repository is located `here <https://hub.docker.com/_/postgres>`_.
Nowadays it is recommended to use the official PostgreSQL image from the PostgreSQL community. The repository is located `here <https://hub.docker.com/_/postgres>`_.
@ -91,9 +91,11 @@ Mailu PostgreSQL
----------------
----------------
Mailu optionally came with a pre-configured PostgreSQL image which was deprecated in Mailu 1.8.
Mailu optionally came with a pre-configured PostgreSQL image which was deprecated in Mailu 1.8.
Since Mailu 1.9 it is removed from Mailu. The following section describes how to move to a different PostgreSQL image for novice administrators. The official PostgreSQL image (Postgres) will be used.
Since Mailu 1.9 it is removed from Mailu. The following section describes how to move to a different
PostgreSQL image for novice administrators. The official PostgreSQL image (Postgres) will be used.
A Mailu deployment with the Mailu PostgreSQL image, only used PostgreSQL for the Admin container (Web administration interface). Roundcube used SQLite as database back-end.
A Mailu deployment with the Mailu PostgreSQL image, will only use PostgreSQL for the Admin container
(Web administration interface). Roundcube uses SQLite as database back-end.
Mailu uses the following configuration for connecting to the database:
Mailu uses the following configuration for connecting to the database:
- Database host: 'database'
- Database host: 'database'
@ -206,4 +208,4 @@ Optionally you can remove left-over files which were used by the old database:
..note::
..note::
Roundcube does not offer a migration tool for moving from SQLite to PostgreSQL.
Roundcube does not offer a migration tool for moving from SQLite to PostgreSQL.
In case roundcube is used, then in the setup utility SQLite can be chosen as database back end for roundcube.
Incase roundcube is used, the Mailu setup utility can be used to specify SQLite for the roundcube database backend.
Mailu is supporting automatic spam learning for messages moved to the Junk mailbox. Any email moved from the Junk Folder will learnt as ham.
Mailu supports automatic spam learning for messages moved to the Junk mailbox. Any email moved from the Junk Folder will learnt as ham.
If you already have an existing mailbox and want Mailu to learn them all as ham messages, you might run rspamc from within the dovecot container:
If you already have an existing mailbox and want Mailu to learn them all as ham messages, you might run rspamc from within the dovecot container:
@ -779,7 +779,7 @@ Detailed instructions can be found at https://docs.docker.com/compose/install/
*Issue reference:*`853`_.
*Issue reference:*`853`_.
Why are still spam mails being discarded?
Why are spam mails being discarded?
`````````````````````````````````````````
`````````````````````````````````````````
Disabling antispam in the user settings actually disables automatic classification of messages as spam and stops moving them to the `junk` folder. It does not stop spam scanning and filtering.
Disabling antispam in the user settings actually disables automatic classification of messages as spam and stops moving them to the `junk` folder. It does not stop spam scanning and filtering.
@ -793,9 +793,9 @@ Why is SPF failing while properly setup?
Very often, SPF failure is related to Mailu sending emails with a different IP address than the one configured in the env file.
Very often, SPF failure is related to Mailu sending emails with a different IP address than the one configured in the env file.
This is mostly due to using a separate IP address for Mailu and still having masquerading nat setup for Docker, which results in a different outbound IP address. You can simply check the email headers on the receiving side to confirm this.
This is mostly due to using a separate IP address for Mailu and still having masquerading NAT setup for Docker, which results in a different outbound IP address. You can simply check the email headers on the receiving side to confirm this.
If you wish to explicitely nat Mailu outbound traffic, it is usually easy to source-nat outgoing SMTP traffic using iptables :
If you wish to explicitely NAT Mailu outbound traffic, it is usually easy to source-NAT outgoing SMTP traffic using iptables :
First, check if you are really sure the user is a legitimate sender, i.e. the registered user is authenticated successfully and own either the account or alias he/she is trying to send from. If you are really sure this is correct, then the user might try to errornously send via port 25 insteadof the designated SMTP client-ports. Port 25 is meant for server-to-server delivery, while users should use port 587 or 465.
First, check if you are really sure the user is a legitimate sender, i.e. the registered user is authenticated successfully and own either the account or alias he/she is trying to send from. If you are really sure this is correct, then the user might try to erroneously send via port 25 insteadof the designated SMTP client-ports. Port 25 is meant for server-to-server delivery, while users should use port 587 or 465.
The admin container won't start and its log says ``Critical: your DNS resolver isn't doing DNSSEC validation``
The admin container won't start and its log says ``Critical: your DNS resolver isn't doing DNSSEC validation``
@ -31,7 +31,7 @@ Docker is able to forward logs to multiple log engines. Read the following docum
.._external_certs:
.._external_certs:
Managing of external Let's encrypt certificates
Managing of external Let's Encrypt certificates
-----------------------------------------------
-----------------------------------------------
When you are not using the embedded ``letsencrypt`` option from Mailu,
When you are not using the embedded ``letsencrypt`` option from Mailu,
@ -59,11 +59,14 @@ And the certbot command you will use in crontab would look something like:
Migrating an instance
Migrating an instance
---------------------
---------------------
The SMTP protocol has an embedded retry mechanism and multiple MX that can serve a single domain, so that most migration processes or maintenance processes do not require any specific care.
The SMTP protocol has an embedded retry mechanism and multiple MX that can serve a single domain, so that most migration processes
or maintenance processes do not require any specific care.
Mailu relies heavily on files for storing everything, which helps the migration process, that can be performed based on file synchronization.
Mailu relies heavily on files for storing everything, which helps the migration process, that can be performed based on file synchronization.
The suggested migration process consists of setting up a new backup server that drops incoming emails (Mailu not started), synchronizing both servers, stopping the main server and launching the backup server. Then, the backup server is switched as a main MX and the old server is deleted.
The suggested migration process consists of setting up a new backup server that drops incoming emails (Mailu not started),
synchronizing both servers, stopping the main server and launching the backup server. Then, the backup server is switched
as a main MX and the old server is deleted.
1. Prepare your new server, copy your ``docker-compose.yml``, ``.env`` and basic configuration files to the server, so that it is ready to start configuration Mailu, *do not start Mailu*
1. Prepare your new server, copy your ``docker-compose.yml``, ``.env`` and basic configuration files to the server, so that it is ready to start configuration Mailu, *do not start Mailu*
2. Setup your DNS so that the backup server is an additional, deprioritized MX for the domain; this can be complex if you serve many domains, in which case you can simply accept that some remote MX will retry for a couple of minutes, skip this step
2. Setup your DNS so that the backup server is an additional, deprioritized MX for the domain; this can be complex if you serve many domains, in which case you can simply accept that some remote MX will retry for a couple of minutes, skip this step
One of Mailu use cases is as part of a larger services platform, where maybe other Web services are available than Mailu Webmail and admin interface.
One of Mailu's use cases is as part of a larger services platform, where maybe
other Web services are available than just Mailu Webmail and Admin interfaces.
In such a configuration, one would usually run a frontend reverse proxy to serve all Web contents based on criteria like the requested hostname (virtual hosts) and/or the requested path. Mailu Admin Web frontend is disabled in the default setup for security reasons, it is however expected that most users will enable it at some point. Also, due to Docker Compose configuration structure, it is impossible for us to make disabling the Web frontend completely available through a configuration variable. This guide was written to help users setup such an architecture.
In such a configuration, one would usually run a frontend reverse proxy to serve all
Web contents based on criteria like the requested hostname (virtual hosts)
and/or the requested path.
The Mailu Admin Web frontend is disabled in the default setup for security reasons,
it is however expected that most users will enable it at some point. Also, due
to the Docker Compose configuration structure, it is impossible for us to facilitate
disabling the Web frontend with a configuration variable. This guide was written to
help users setup such an architecture.
There are basically three options, from the most to the least recommended one:
There are basically three options, from the most to the least recommended one:
@ -19,7 +28,8 @@ This is configured in the mailu.env file. See the :ref:`configuration reference
Have Mailu Web frontend listen locally
Have Mailu Web frontend listen locally
--------------------------------------
--------------------------------------
The simplest and safest option is to modify the port forwards for Mailu Web frontend and have your own frontend point there. For instance, in the ``front`` section of Mailu ``docker-compose.yml``, use local ports 8080 and 8443 respectively for HTTP and HTTPS:
The simplest and safest option is to modify the port forwards for Mailu Web frontend and have your own frontend point there.
For instance, in the ``front`` section of Mailu ``docker-compose.yml``, use local ports 8080 and 8443 respectively for HTTP and HTTPS:
..code-block:: yaml
..code-block:: yaml
@ -35,7 +45,8 @@ The simplest and safest option is to modify the port forwards for Mailu Web fron
volumes:
volumes:
- "$ROOT/certs:/certs"
- "$ROOT/certs:/certs"
Then on your own frontend, point to these local ports. In practice, you only need to point to the HTTPS port (as the HTTP port simply redirects there). Here is an example Nginx configuration:
Then on your own frontend, point to these local ports. In practice, you only need to point to the HTTPS port
(as the HTTP port simply redirects there). Here is an example Nginx configuration:
..code-block:: nginx
..code-block:: nginx
@ -98,7 +109,8 @@ Because the admin interface is served as ``/admin``, the Webmail as ``/webmail``
REAL_IP_FROM=x.x.x.x,y.y.y.y.y
REAL_IP_FROM=x.x.x.x,y.y.y.y.y
#x.x.x.x,y.y.y.y.y is the static IP address your reverse proxy uses for connecting to Mailu.
#x.x.x.x,y.y.y.y.y is the static IP address your reverse proxy uses for connecting to Mailu.
Finally, you might want to serve the admin interface on a separate virtual host but not expose the admin container directly (have your own HTTPS virtual hosts on top of Mailu, one public for the Webmail and one internal for administration for instance).
Finally, you might want to serve the admin interface on a separate virtual host but not expose the admin container
directly (have your own HTTPS virtual hosts on top of Mailu, one public for the Webmail and one internal for administration for instance).
Here is an example configuration :
Here is an example configuration :
@ -153,17 +165,20 @@ Traefik as reverse proxy
`Traefik`_ is a popular reverse-proxy aimed at containerized systems.
`Traefik`_ is a popular reverse-proxy aimed at containerized systems.
As such, many may wish to integrate Mailu into a system which already uses Traefik as its sole ingress/reverse-proxy.
As such, many may wish to integrate Mailu into a system which already uses Traefik as its sole ingress/reverse-proxy.
As the ``mailu/front`` container uses Nginx not only for ``HTTP`` forwarding, but also for the mail-protocols like ``SMTP``, ``IMAP``, etc, we need to keep this
As the ``mailu/front`` container uses Nginx not only for ``HTTP`` forwarding, but also for the mail-protocols like ``SMTP``, ``IMAP``, etc
container around even when using another ``HTTP`` reverse-proxy. Furthermore, Traefik is neither able to forward non-HTTP, nor can it easily forward HTTPS-to-HTTPS.
, we need to keep this container around even when using another ``HTTP`` reverse-proxy. Furthermore, Traefik is neither able to
forward non-HTTP, nor can it easily forward HTTPS-to-HTTPS.
This, however, means 3 things:
This, however, means 3 things:
- ``mailu/front`` needs to listen internally on ``HTTP`` rather than ``HTTPS``
- ``mailu/front`` needs to listen internally on ``HTTP`` rather than ``HTTPS``
- ``mailu/front`` is not exposed to the outside world on ``HTTP``
- ``mailu/front`` is not exposed to the outside world on ``HTTP``
- ``mailu/front`` still needs ``SSL`` certificates (here, we assume ``letsencrypt``) for a well-behaved mail service
- ``mailu/front`` still needs ``SSL`` certificates (here, we assume ``letsencrypt``) for a well-behaved mail service
This makes the setup with Traefik a bit harder: Traefik saves its certificates in a proprietary *JSON* file, which is not readable by Nginx in the ``front``-container.
This makes the setup with Traefik a bit harder: Traefik saves its certificates in a proprietary *JSON* file, which is not readable
To solve this, your ``acme.json`` needs to be exposed to the host or a ``docker-volume``. It will then be read by a script in another container,
by Nginx in the ``front``-container. To solve this, your ``acme.json`` needs to be exposed to the host or a ``docker-volume``.
which will dump the certificates as ``PEM`` files, readable for Nginx. The ``front`` container will automatically reload Nginx whenever these certificates change.
It will then be read by a script in another container, which will dump the certificates as ``PEM`` files, readable for
Nginx. The ``front`` container will automatically reload Nginx whenever these certificates change.
To set this up, first set ``TLS_FLAVOR=mail`` in your ``.env``. This tells ``mailu/front`` not to try to request certificates using ``letsencrypt``,
To set this up, first set ``TLS_FLAVOR=mail`` in your ``.env``. This tells ``mailu/front`` not to try to request certificates using ``letsencrypt``,
but to read provided certificates, and use them only for mail-protocols, not for ``HTTP``.
but to read provided certificates, and use them only for mail-protocols, not for ``HTTP``.
@ -179,12 +194,13 @@ Add the respective Traefik labels for your domain/configuration, like
..note:: Please don’t forget to add ``TRAEFIK_DOMAIN=[...]`` TO YOUR ``.env``
..note:: Please don’t forget to add ``TRAEFIK_DOMAIN=[...]`` TO YOUR ``.env``
If your Traefik is configured to automatically request certificates from *letsencrypt*, then you’ll have a certificate for ``mail.your.example.com`` now. However,
If your Traefik is configured to automatically request certificates from *letsencrypt*, then you’ll have a certificate
``mail.your.example.com`` might only be the location where you want the Mailu web-interfaces to live — your mail should be sent/received from ``your.example.com``,
for ``mail.your.example.com`` now. However, ``mail.your.example.com`` might only be the location where you want the Mailu web-interfaces
and this is the ``DOMAIN`` in your ``.env``?
to live — your mail should be sent/received from ``your.example.com``, and this is the ``DOMAIN`` in your ``.env``?
To support that use-case, Traefik can request ``SANs`` for your domain. The configuration for this will depend on your Traefik version.
To support that use-case, Traefik can request ``SANs`` for your domain. The configuration for this will depend on your Traefik version.
Mailu must also be configured with the information what header is used by the reverse proxy for passing the remote client IP. This is configured in mailu.env:
Mailu must also be configured with the information what header is used by the reverse proxy for passing the remote
client IP. This is configured in mailu.env:
..code-block:: docker
..code-block:: docker
@ -219,7 +235,8 @@ Add the appropriate labels for your domain(s) to the ``front`` container in ``do
Of course, be sure to define the Certificate Resolver ``foo`` in the static configuration as well.
Of course, be sure to define the Certificate Resolver ``foo`` in the static configuration as well.
Alternatively, you can define SANs in the Traefik static configuration using routers, or in the static configuration using entrypoints. Refer to the Traefik documentation for more details.
Alternatively, you can define SANs in the Traefik static configuration using routers, or in the static configuration using entrypoints.
Refer to the Traefik documentation for more details.
@ -45,10 +45,12 @@ It offers the following configuration options:
Access the web administration interface
Access the web administration interface
---------------------------------------
---------------------------------------
The admin GUI is by default accessed via the URL `https://<my domain>/admin`, when it's enabled in the setup utility or by manually setting `ADMIN=true` in `mailu.env`.
The admin GUI is by default accessed via the URL `https://<my domain>/admin`, when it's enabled in the setup utility
or by manually setting `ADMIN=true` in `mailu.env`.
To login the admin GUI enter the email address and password of an user.
To login the admin GUI enter the email address and password of an user.
Only global administrator users have access to all configuration settings and the Rspamd webgui. Other users will be presented with settings for only their account, and domains they are managers of.
Only global administrator users have access to all configuration settings and the Rspamd webgui. Other users will be
presented with settings for only their account, and domains they are managers of.
To create a user who is a global administrator for a new installation, the Mailu.env file can be adapted.
To create a user who is a global administrator for a new installation, the Mailu.env file can be adapted.
For more information see the section 'Admin account - automatic creation' in :ref:`the configuration reference <admin_account>`.
For more information see the section 'Admin account - automatic creation' in :ref:`the configuration reference <admin_account>`.
Adam Ward
2 years ago