Remove Mailu PostgreSQL. Make roundcube database configurable via setup. Fix #1838.

master
Dimitri Huisman 3 years ago
parent 20f00a3699
commit 1eeffe29c0

@ -23,10 +23,6 @@ To switch to a different database back-end:
Mailu has now been switched to the new database back-end. The Mailu configuration has also been migrated.
.. note::
The setup configuration wizard (setup.mailu.io) only supports creating config files for the same database back-end. When creating new config files, select the desired database flavour in the setup and enter dummy values for roundcube.
In the generated mailu.env file, configure all ROUNDCUBE_DB_* environment variables to the old values. For SQLite you can remove all the ROUNDCUBE_DB_* values.
External MySQL/MariaDB
----------------------
@ -209,8 +205,5 @@ Optionally you can remove left-over files which were used by the old database:
- /mailu/data/psql_db (old database files)
.. note::
The setup configuration wizard (setup.mailu.io) only supports creating config files for the same database back-end. When creating new config files, select PostgreSQL in the setup and enter dummy values for roundcube.
In the generated mailu.env file, remove all ROUNDCUBE_DB_* environment variables.
Now Admin will use PostgreSQL and roundcube will keep using Roundcube.
Roundcube does not offer a migration tool for moving from SQLite to PostgreSQL.
In case roundcube is used, then in the setup utility SQLite can be chosen as database back end for roundcube.

@ -1,39 +0,0 @@
ARG DISTRO=alpine:3.14.2
FROM $DISTRO
ENV TZ Etc/UTC
# python3 shared with most images
RUN apk add --no-cache \
python3 py3-pip bash py3-multidict tzdata \
&& pip3 install --upgrade pip
# Shared layer between nginx, dovecot, postfix, postgresql, rspamd, unbound, rainloop, roundcube
RUN pip3 install socrate==0.2.0
# Image specific layers under this line
RUN apk add --no-cache \
postgresql postgresql-libs busybox-suid sudo tar \
&& apk add --virtual .build-deps gcc musl-dev postgresql-dev python3-dev \
&& pip3 install psycopg2 anosql==0.3.1 \
&& apk --purge del .build-deps
COPY start.py /start.py
COPY basebackup.sh /basebackup.sh
COPY conf /conf
COPY postgres_crontab /etc/postgres_crontab
RUN crontab /etc/postgres_crontab
ENV LANG en_US.UTF-8
RUN mkdir -p /data /backup /run/postgresql \
&& chown -R postgres:postgres /run/postgresql \
&& chmod 2777 /run/postgresql
VOLUME /data
VOLUME /backup
EXPOSE 5432
CMD /start.py
HEALTHCHECK CMD psql -h 127.0.0.1 -d postgres -U health -c "select 1 as ok;" || exit 1

@ -1,28 +0,0 @@
#!/bin/sh
dest="/backup/base-$(date +%F-%H%M)"
last=$(ls -d /backup/base* | tail -n1)
mkdir $dest || exit $?
pg_basebackup --wal-method=none --pgdata=$dest --format=tar --gzip --username=postgres || exit $?
# Clean old base backups, keep the last and the current.
for d in /backup/base*; do
if [ "$d" == "$last" ] || [ "$d" == "$dest" ]; then
continue
fi
rm -r $d || exit $?
done
# Clean the wall archive
cd /backup/wal_archive || exit $?
if [ $(ls *.*.backup | wc -l) -lt 2 ]; then
exit 0
fi
# Find the single last wal.backup point
prev_wal_start="$(ls *.*.backup | tail -n2 | head -n1 | cut -d '.' -f 1)"
for f in $(ls) ; do
if [ "$f" \< "$prev_wal_start" ]; then
rm -v /backup/wal_archive/$f
fi
done

@ -1,91 +0,0 @@
# PostgreSQL Client Authentication Configuration File
# ===================================================
#
# Refer to the "Client Authentication" section in the PostgreSQL
# documentation for a complete description of this file. A short
# synopsis follows.
#
# This file controls: which hosts are allowed to connect, how clients
# are authenticated, which PostgreSQL user names they can use, which
# databases they can access. Records take one of these forms:
#
# local DATABASE USER METHOD [OPTIONS]
# host DATABASE USER ADDRESS METHOD [OPTIONS]
# hostssl DATABASE USER ADDRESS METHOD [OPTIONS]
# hostnossl DATABASE USER ADDRESS METHOD [OPTIONS]
#
# (The uppercase items must be replaced by actual values.)
#
# The first field is the connection type: "local" is a Unix-domain
# socket, "host" is either a plain or SSL-encrypted TCP/IP socket,
# "hostssl" is an SSL-encrypted TCP/IP socket, and "hostnossl" is a
# plain TCP/IP socket.
#
# DATABASE can be "all", "sameuser", "samerole", "replication", a
# database name, or a comma-separated list thereof. The "all"
# keyword does not match "replication". Access to replication
# must be enabled in a separate record (see example below).
#
# USER can be "all", a user name, a group name prefixed with "+", or a
# comma-separated list thereof. In both the DATABASE and USER fields
# you can also write a file name prefixed with "@" to include names
# from a separate file.
#
# ADDRESS specifies the set of hosts the record matches. It can be a
# host name, or it is made up of an IP address and a CIDR mask that is
# an integer (between 0 and 32 (IPv4) or 128 (IPv6) inclusive) that
# specifies the number of significant bits in the mask. A host name
# that starts with a dot (.) matches a suffix of the actual host name.
# Alternatively, you can write an IP address and netmask in separate
# columns to specify the set of hosts. Instead of a CIDR-address, you
# can write "samehost" to match any of the server's own IP addresses,
# or "samenet" to match any address in any subnet that the server is
# directly connected to.
#
# METHOD can be "trust", "reject", "md5", "password", "scram-sha-256",
# "gss", "sspi", "ident", "peer", "pam", "ldap", "radius" or "cert".
# Note that "password" sends passwords in clear text; "md5" or
# "scram-sha-256" are preferred since they send encrypted passwords.
#
# OPTIONS are a set of options for the authentication in the format
# NAME=VALUE. The available options depend on the different
# authentication methods -- refer to the "Client Authentication"
# section in the documentation for a list of which options are
# available for which authentication methods.
#
# Database and user names containing spaces, commas, quotes and other
# special characters must be quoted. Quoting one of the keywords
# "all", "sameuser", "samerole" or "replication" makes the name lose
# its special character, and just match a database or username with
# that name.
#
# This file is read on server startup and when the server receives a
# SIGHUP signal. If you edit the file on a running system, you have to
# SIGHUP the server for the changes to take effect, run "pg_ctl reload",
# or execute "SELECT pg_reload_conf()".
#
# Put your actual configuration here
# ----------------------------------
#
# If you want to allow non-local connections, you need to add more
# "host" records. In that case you will also need to make PostgreSQL
# listen on a non-local interface via the listen_addresses
# configuration parameter, or via the -i or -h command line switches.
# TYPE DATABASE USER ADDRESS METHOD
# "local" is for Unix domain socket connections only
local all all peer map=local
# IPv4 connections:
host mailu mailu {{ SUBNET }} md5
host postgres health 127.0.0.1/32 trust
# IPv6 local connections:
host mailu mailu {{ SUBNET6|default('::1/128') }} md5
host all all ::1/128 reject
# Allow replication connections from localhost, by a user with the
# replication privilege.
local replication all peer map=local
host replication all 127.0.0.1/32 reject
host replication all ::1/128 reject

@ -1,44 +0,0 @@
# PostgreSQL User Name Maps
# =========================
#
# Refer to the PostgreSQL documentation, chapter "Client
# Authentication" for a complete description. A short synopsis
# follows.
#
# This file controls PostgreSQL user name mapping. It maps external
# user names to their corresponding PostgreSQL user names. Records
# are of the form:
#
# MAPNAME SYSTEM-USERNAME PG-USERNAME
#
# (The uppercase quantities must be replaced by actual values.)
#
# MAPNAME is the (otherwise freely chosen) map name that was used in
# pg_hba.conf. SYSTEM-USERNAME is the detected user name of the
# client. PG-USERNAME is the requested PostgreSQL user name. The
# existence of a record specifies that SYSTEM-USERNAME may connect as
# PG-USERNAME.
#
# If SYSTEM-USERNAME starts with a slash (/), it will be treated as a
# regular expression. Optionally this can contain a capture (a
# parenthesized subexpression). The substring matching the capture
# will be substituted for \1 (backslash-one) if present in
# PG-USERNAME.
#
# Multiple maps may be specified in this file and used by pg_hba.conf.
#
# No map names are defined in the default configuration. If all
# system user names and PostgreSQL user names are the same, you don't
# need anything in this file.
#
# This file is read on server startup and when the postmaster receives
# a SIGHUP signal. If you edit the file on a running system, you have
# to SIGHUP the postmaster for the changes to take effect. You can
# use "pg_ctl reload" to do that.
# Put your actual configuration here
# ----------------------------------
# MAPNAME SYSTEM-USERNAME PG-USERNAME
local postgres postgres
local root postgres

@ -1,658 +0,0 @@
# -----------------------------
# PostgreSQL configuration file
# -----------------------------
#
# This file consists of lines of the form:
#
# name = value
#
# (The "=" is optional.) Whitespace may be used. Comments are introduced with
# "#" anywhere on a line. The complete list of parameter names and allowed
# values can be found in the PostgreSQL documentation.
#
# The commented-out settings shown in this file represent the default values.
# Re-commenting a setting is NOT sufficient to revert it to the default value;
# you need to reload the server.
#
# This file is read on server startup and when the server receives a SIGHUP
# signal. If you edit the file on a running system, you have to SIGHUP the
# server for the changes to take effect, run "pg_ctl reload", or execute
# "SELECT pg_reload_conf()". Some parameters, which are marked below,
# require a server shutdown and restart to take effect.
#
# Any parameter can also be given as a command-line option to the server, e.g.,
# "postgres -c log_connections=on". Some parameters can be changed at run time
# with the "SET" SQL command.
#
# Memory units: kB = kilobytes Time units: ms = milliseconds
# MB = megabytes s = seconds
# GB = gigabytes min = minutes
# TB = terabytes h = hours
# d = days
#------------------------------------------------------------------------------
# FILE LOCATIONS
#------------------------------------------------------------------------------
# The default values of these variables are driven from the -D command-line
# option or PGDATA environment variable, represented here as ConfigDir.
#data_directory = 'ConfigDir' # use data in another directory
# (change requires restart)
#hba_file = 'ConfigDir/pg_hba.conf' # host-based authentication file
# (change requires restart)
#ident_file = 'ConfigDir/pg_ident.conf' # ident configuration file
# (change requires restart)
# If external_pid_file is not explicitly set, no extra PID file is written.
#external_pid_file = '' # write an extra PID file
# (change requires restart)
#------------------------------------------------------------------------------
# CONNECTIONS AND AUTHENTICATION
#------------------------------------------------------------------------------
# - Connection Settings -
listen_addresses = '*' # what IP address(es) to listen on;
# comma-separated list of addresses;
# defaults to 'localhost'; use '*' for all
# (change requires restart)
#port = 5432 # (change requires restart)
max_connections = 100 # (change requires restart)
#superuser_reserved_connections = 3 # (change requires restart)
unix_socket_directories = '/run/postgresql,/tmp' # comma-separated list of directories
# (change requires restart)
#unix_socket_group = '' # (change requires restart)
#unix_socket_permissions = 0777 # begin with 0 to use octal notation
# (change requires restart)
#bonjour = off # advertise server via Bonjour
# (change requires restart)
#bonjour_name = '' # defaults to the computer name
# (change requires restart)
# - Security and Authentication -
#authentication_timeout = 1min # 1s-600s
#ssl = off
#ssl_ciphers = 'HIGH:MEDIUM:+3DES:!aNULL' # allowed SSL ciphers
#ssl_prefer_server_ciphers = on
#ssl_ecdh_curve = 'prime256v1'
#ssl_dh_params_file = ''
#ssl_cert_file = 'server.crt'
#ssl_key_file = 'server.key'
#ssl_ca_file = ''
#ssl_crl_file = ''
#password_encryption = md5 # md5 or scram-sha-256
#db_user_namespace = off
#row_security = on
# GSSAPI using Kerberos
#krb_server_keyfile = ''
#krb_caseins_users = off
# - TCP Keepalives -
# see "man 7 tcp" for details
#tcp_keepalives_idle = 0 # TCP_KEEPIDLE, in seconds;
# 0 selects the system default
#tcp_keepalives_interval = 0 # TCP_KEEPINTVL, in seconds;
# 0 selects the system default
#tcp_keepalives_count = 0 # TCP_KEEPCNT;
# 0 selects the system default
#------------------------------------------------------------------------------
# RESOURCE USAGE (except WAL)
#------------------------------------------------------------------------------
# - Memory -
shared_buffers = 128MB # min 128kB
# (change requires restart)
#huge_pages = try # on, off, or try
# (change requires restart)
#temp_buffers = 8MB # min 800kB
#max_prepared_transactions = 0 # zero disables the feature
# (change requires restart)
# Caution: it is not advisable to set max_prepared_transactions nonzero unless
# you actively intend to use prepared transactions.
#work_mem = 4MB # min 64kB
#maintenance_work_mem = 64MB # min 1MB
#replacement_sort_tuples = 150000 # limits use of replacement selection sort
#autovacuum_work_mem = -1 # min 1MB, or -1 to use maintenance_work_mem
#max_stack_depth = 2MB # min 100kB
dynamic_shared_memory_type = posix # the default is the first option
# supported by the operating system:
# posix
# sysv
# windows
# mmap
# use none to disable dynamic shared memory
# (change requires restart)
# - Disk -
#temp_file_limit = -1 # limits per-process temp file space
# in kB, or -1 for no limit
# - Kernel Resource Usage -
#max_files_per_process = 1000 # min 25
# (change requires restart)
#shared_preload_libraries = '' # (change requires restart)
# - Cost-Based Vacuum Delay -
#vacuum_cost_delay = 0 # 0-100 milliseconds
#vacuum_cost_page_hit = 1 # 0-10000 credits
#vacuum_cost_page_miss = 10 # 0-10000 credits
#vacuum_cost_page_dirty = 20 # 0-10000 credits
#vacuum_cost_limit = 200 # 1-10000 credits
# - Background Writer -
#bgwriter_delay = 200ms # 10-10000ms between rounds
#bgwriter_lru_maxpages = 100 # 0-1000 max buffers written/round
#bgwriter_lru_multiplier = 2.0 # 0-10.0 multiplier on buffers scanned/round
#bgwriter_flush_after = 512kB # measured in pages, 0 disables
# - Asynchronous Behavior -
#effective_io_concurrency = 1 # 1-1000; 0 disables prefetching
#max_worker_processes = 8 # (change requires restart)
#max_parallel_workers_per_gather = 2 # taken from max_parallel_workers
#max_parallel_workers = 8 # maximum number of max_worker_processes that
# can be used in parallel queries
#old_snapshot_threshold = -1 # 1min-60d; -1 disables; 0 is immediate
# (change requires restart)
#backend_flush_after = 0 # measured in pages, 0 disables
#------------------------------------------------------------------------------
# WRITE AHEAD LOG
#------------------------------------------------------------------------------
# - Settings -
wal_level = replica # minimal, replica, or logical
# (change requires restart)
#fsync = on # flush data to disk for crash safety
# (turning this off can cause
# unrecoverable data corruption)
#synchronous_commit = on # synchronization level;
# off, local, remote_write, remote_apply, or on
#wal_sync_method = fsync # the default is the first option
# supported by the operating system:
# open_datasync
# fdatasync (default on Linux)
# fsync
# fsync_writethrough
# open_sync
#full_page_writes = on # recover from partial page writes
#wal_compression = off # enable compression of full-page writes
#wal_log_hints = off # also do full page writes of non-critical updates
# (change requires restart)
#wal_buffers = -1 # min 32kB, -1 sets based on shared_buffers
# (change requires restart)
#wal_writer_delay = 200ms # 1-10000 milliseconds
#wal_writer_flush_after = 1MB # measured in pages, 0 disables
#commit_delay = 0 # range 0-100000, in microseconds
#commit_siblings = 5 # range 1-1000
# - Checkpoints -
checkpoint_timeout = 60s # range 30s-1d
#max_wal_size = 1GB
#min_wal_size = 80MB
#checkpoint_completion_target = 0.5 # checkpoint target duration, 0.0 - 1.0
#checkpoint_flush_after = 256kB # measured in pages, 0 disables
checkpoint_warning = 15s # 0 disables
# - Archiving -
archive_mode = on # enables archiving; off, on, or always
# (change requires restart)
archive_command = 'test ! -f /backup/wal_archive/%f && gzip < %p > /backup/wal_archive/%f' # command to use to archive a logfile segment
# placeholders: %p = path of file to archive
# %f = file name only
# e.g. 'test ! -f /mnt/server/archivedir/%f && cp %p /mnt/server/archivedir/%f'
archive_timeout = 60 # force a logfile segment switch after this
# number of seconds; 0 disables
#------------------------------------------------------------------------------
# REPLICATION
#------------------------------------------------------------------------------
# - Sending Server(s) -
# Set these on the master and on any standby that will send replication data.
#max_wal_senders = 10 # max number of walsender processes
# (change requires restart)
#wal_keep_segments = 0 # in logfile segments, 16MB each; 0 disables
#wal_sender_timeout = 60s # in milliseconds; 0 disables
#max_replication_slots = 10 # max number of replication slots
# (change requires restart)
#track_commit_timestamp = off # collect timestamp of transaction commit
# (change requires restart)
# - Master Server -
# These settings are ignored on a standby server.
#synchronous_standby_names = '' # standby servers that provide sync rep
# method to choose sync standbys, number of sync standbys,
# and comma-separated list of application_name
# from standby(s); '*' = all
#vacuum_defer_cleanup_age = 0 # number of xacts by which cleanup is delayed
# - Standby Servers -
# These settings are ignored on a master server.
#hot_standby = on # "off" disallows queries during recovery
# (change requires restart)
#max_standby_archive_delay = 30s # max delay before canceling queries
# when reading WAL from archive;
# -1 allows indefinite delay
#max_standby_streaming_delay = 30s # max delay before canceling queries
# when reading streaming WAL;
# -1 allows indefinite delay
#wal_receiver_status_interval = 10s # send replies at least this often
# 0 disables
#hot_standby_feedback = off # send info from standby to prevent
# query conflicts
#wal_receiver_timeout = 60s # time that receiver waits for
# communication from master
# in milliseconds; 0 disables
#wal_retrieve_retry_interval = 5s # time to wait before retrying to
# retrieve WAL after a failed attempt
# - Subscribers -
# These settings are ignored on a publisher.
#max_logical_replication_workers = 4 # taken from max_worker_processes
# (change requires restart)
#max_sync_workers_per_subscription = 2 # taken from max_logical_replication_workers
#------------------------------------------------------------------------------
# QUERY TUNING
#------------------------------------------------------------------------------
# - Planner Method Configuration -
#enable_bitmapscan = on
#enable_hashagg = on
#enable_hashjoin = on
#enable_indexscan = on
#enable_indexonlyscan = on
#enable_material = on
#enable_mergejoin = on
#enable_nestloop = on
#enable_seqscan = on
#enable_sort = on
#enable_tidscan = on
# - Planner Cost Constants -
#seq_page_cost = 1.0 # measured on an arbitrary scale
#random_page_cost = 4.0 # same scale as above
#cpu_tuple_cost = 0.01 # same scale as above
#cpu_index_tuple_cost = 0.005 # same scale as above
#cpu_operator_cost = 0.0025 # same scale as above
#parallel_tuple_cost = 0.1 # same scale as above
#parallel_setup_cost = 1000.0 # same scale as above
#min_parallel_table_scan_size = 8MB
#min_parallel_index_scan_size = 512kB
#effective_cache_size = 4GB
# - Genetic Query Optimizer -
#geqo = on
#geqo_threshold = 12
#geqo_effort = 5 # range 1-10
#geqo_pool_size = 0 # selects default based on effort
#geqo_generations = 0 # selects default based on effort
#geqo_selection_bias = 2.0 # range 1.5-2.0
#geqo_seed = 0.0 # range 0.0-1.0
# - Other Planner Options -
#default_statistics_target = 100 # range 1-10000
#constraint_exclusion = partition # on, off, or partition
#cursor_tuple_fraction = 0.1 # range 0.0-1.0
#from_collapse_limit = 8
#join_collapse_limit = 8 # 1 disables collapsing of explicit
# JOIN clauses
#force_parallel_mode = off
#------------------------------------------------------------------------------
# ERROR REPORTING AND LOGGING
#------------------------------------------------------------------------------
# - Where to Log -
#log_destination = 'stderr' # Valid values are combinations of
# stderr, csvlog, syslog, and eventlog,
# depending on platform. csvlog
# requires logging_collector to be on.
# This is used when logging to stderr:
#logging_collector = off # Enable capturing of stderr and csvlog
# into log files. Required to be on for
# csvlogs.
# (change requires restart)
# These are only used if logging_collector is on:
#log_directory = 'log' # directory where log files are written,
# can be absolute or relative to PGDATA
#log_filename = 'postgresql-%Y-%m-%d_%H%M%S.log' # log file name pattern,
# can include strftime() escapes
#log_file_mode = 0600 # creation mode for log files,
# begin with 0 to use octal notation
#log_truncate_on_rotation = off # If on, an existing log file with the
# same name as the new log file will be
# truncated rather than appended to.
# But such truncation only occurs on
# time-driven rotation, not on restarts
# or size-driven rotation. Default is
# off, meaning append to existing files
# in all cases.
#log_rotation_age = 1d # Automatic rotation of logfiles will
# happen after that time. 0 disables.
#log_rotation_size = 10MB # Automatic rotation of logfiles will
# happen after that much log output.
# 0 disables.
# These are relevant when logging to syslog:
#syslog_facility = 'LOCAL0'
#syslog_ident = 'postgres'
#syslog_sequence_numbers = on
#syslog_split_messages = on
# This is only relevant when logging to eventlog (win32):
# (change requires restart)
#event_source = 'PostgreSQL'
# - When to Log -
#client_min_messages = notice # values in order of decreasing detail:
# debug5
# debug4
# debug3
# debug2
# debug1
# log
# notice
# warning
# error
#log_min_messages = warning # values in order of decreasing detail:
# debug5
# debug4
# debug3
# debug2
# debug1
# info
# notice
# warning
# error
# log
# fatal
# panic
#log_min_error_statement = error # values in order of decreasing detail:
# debug5
# debug4
# debug3
# debug2
# debug1
# info
# notice
# warning
# error
# log
# fatal
# panic (effectively off)
#log_min_duration_statement = -1 # -1 is disabled, 0 logs all statements
# and their durations, > 0 logs only
# statements running at least this number
# of milliseconds
# - What to Log -
#debug_print_parse = off
#debug_print_rewritten = off
#debug_print_plan = off
#debug_pretty_print = on
#log_checkpoints = off
#log_connections = off
#log_disconnections = off
#log_duration = off
#log_error_verbosity = default # terse, default, or verbose messages
#log_hostname = off
#log_line_prefix = '%m [%p] ' # special values:
# %a = application name
# %u = user name
# %d = database name
# %r = remote host and port
# %h = remote host
# %p = process ID
# %t = timestamp without milliseconds
# %m = timestamp with milliseconds
# %n = timestamp with milliseconds (as a Unix epoch)
# %i = command tag
# %e = SQL state
# %c = session ID
# %l = session line number
# %s = session start timestamp
# %v = virtual transaction ID
# %x = transaction ID (0 if none)
# %q = stop here in non-session
# processes
# %% = '%'
# e.g. '<%u%%%d> '
#log_lock_waits = off # log lock waits >= deadlock_timeout
#log_statement = 'none' # none, ddl, mod, all
#log_replication_commands = off
#log_temp_files = -1 # log temporary files equal or larger
# than the specified size in kilobytes;
# -1 disables, 0 logs all temp files
log_timezone = 'UTC'
# - Process Title -
#cluster_name = '' # added to process titles if nonempty
# (change requires restart)
#update_process_title = on
#------------------------------------------------------------------------------
# RUNTIME STATISTICS
#------------------------------------------------------------------------------
# - Query/Index Statistics Collector -
#track_activities = on
#track_counts = on
#track_io_timing = off
#track_functions = none # none, pl, all
#track_activity_query_size = 1024 # (change requires restart)
#stats_temp_directory = 'pg_stat_tmp'
# - Statistics Monitoring -
#log_parser_stats = off
#log_planner_stats = off
#log_executor_stats = off
#log_statement_stats = off
#------------------------------------------------------------------------------
# AUTOVACUUM PARAMETERS
#------------------------------------------------------------------------------
#autovacuum = on # Enable autovacuum subprocess? 'on'
# requires track_counts to also be on.
#log_autovacuum_min_duration = -1 # -1 disables, 0 logs all actions and
# their durations, > 0 logs only
# actions running at least this number
# of milliseconds.
#autovacuum_max_workers = 3 # max number of autovacuum subprocesses
# (change requires restart)
#autovacuum_naptime = 1min # time between autovacuum runs
#autovacuum_vacuum_threshold = 50 # min number of row updates before
# vacuum
#autovacuum_analyze_threshold = 50 # min number of row updates before
# analyze
#autovacuum_vacuum_scale_factor = 0.2 # fraction of table size before vacuum
#autovacuum_analyze_scale_factor = 0.1 # fraction of table size before analyze
#autovacuum_freeze_max_age = 200000000 # maximum XID age before forced vacuum
# (change requires restart)
#autovacuum_multixact_freeze_max_age = 400000000 # maximum multixact age
# before forced vacuum
# (change requires restart)
#autovacuum_vacuum_cost_delay = 20ms # default vacuum cost delay for
# autovacuum, in milliseconds;
# -1 means use vacuum_cost_delay
#autovacuum_vacuum_cost_limit = -1 # default vacuum cost limit for
# autovacuum, -1 means use
# vacuum_cost_limit
#------------------------------------------------------------------------------
# CLIENT CONNECTION DEFAULTS
#------------------------------------------------------------------------------
# - Statement Behavior -
#search_path = '"$user", public' # schema names
#default_tablespace = '' # a tablespace name, '' uses the default
#temp_tablespaces = '' # a list of tablespace names, '' uses
# only default tablespace
#check_function_bodies = on
#default_transaction_isolation = 'read committed'
#default_transaction_read_only = off
#default_transaction_deferrable = off
#session_replication_role = 'origin'
#statement_timeout = 0 # in milliseconds, 0 is disabled
#lock_timeout = 0 # in milliseconds, 0 is disabled
#idle_in_transaction_session_timeout = 0 # in milliseconds, 0 is disabled
#vacuum_freeze_min_age = 50000000
#vacuum_freeze_table_age = 150000000
#vacuum_multixact_freeze_min_age = 5000000
#vacuum_multixact_freeze_table_age = 150000000
#bytea_output = 'hex' # hex, escape
#xmlbinary = 'base64'
#xmloption = 'content'
#gin_fuzzy_search_limit = 0
#gin_pending_list_limit = 4MB
# - Locale and Formatting -
datestyle = 'iso, mdy'
#intervalstyle = 'postgres'
timezone = 'UTC'
#timezone_abbreviations = 'Default' # Select the set of available time zone
# abbreviations. Currently, there are
# Default
# Australia (historical usage)
# India
# You can create your own file in
# share/timezonesets/.
#extra_float_digits = 0 # min -15, max 3
#client_encoding = sql_ascii # actually, defaults to database
# encoding
# These settings are initialized by initdb, but they can be changed.
lc_messages = 'C' # locale for system error message
# strings
lc_monetary = 'C' # locale for monetary formatting
lc_numeric = 'C' # locale for number formatting
lc_time = 'C' # locale for time formatting
# default configuration for text search
default_text_search_config = 'pg_catalog.english'
# - Other Defaults -
#dynamic_library_path = '$libdir'
#local_preload_libraries = ''
#session_preload_libraries = ''
#------------------------------------------------------------------------------
# LOCK MANAGEMENT
#------------------------------------------------------------------------------
#deadlock_timeout = 1s
#max_locks_per_transaction = 64 # min 10
# (change requires restart)
#max_pred_locks_per_transaction = 64 # min 10
# (change requires restart)
#max_pred_locks_per_relation = -2 # negative values mean
# (max_pred_locks_per_transaction
# / -max_pred_locks_per_relation) - 1
#max_pred_locks_per_page = 2 # min 0
#------------------------------------------------------------------------------
# VERSION/PLATFORM COMPATIBILITY
#------------------------------------------------------------------------------
# - Previous PostgreSQL Versions -
#array_nulls = on
#backslash_quote = safe_encoding # on, off, or safe_encoding
#default_with_oids = off
#escape_string_warning = on
#lo_compat_privileges = off
#operator_precedence_warning = off
#quote_all_identifiers = off
#standard_conforming_strings = on
#synchronize_seqscans = on
# - Other Platforms and Clients -
#transform_null_equals = off
#------------------------------------------------------------------------------
# ERROR HANDLING
#------------------------------------------------------------------------------
#exit_on_error = off # terminate session on any error?
#restart_after_crash = on # reinitialize after backend crash?
#------------------------------------------------------------------------------
# CONFIG FILE INCLUDES
#------------------------------------------------------------------------------
# These options allow settings to be loaded from files other than the
# default postgresql.conf.
#include_dir = 'conf.d' # include files ending in '.conf' from
# directory 'conf.d'
#include_if_exists = 'exists.conf' # include file only if it exists
#include = 'special.conf' # include file
#------------------------------------------------------------------------------
# CUSTOMIZED OPTIONS
#------------------------------------------------------------------------------
# Add settings for extensions here

@ -1,42 +0,0 @@
-- name: create_mailu_user!
-- Create the mailu user if it does not exist.
do $$
begin
create user mailu;
exception when others then
raise notice 'mailu user not created -- already exists';
end
$$;
-- name: create_health_user!
-- Create the mailu user if it does not exist.
do $$
begin
create user health;
exception when others then
raise notice 'health user not created -- already exists';
end
$$;
-- name: grant_health!
-- Grant connect permission for the health user
grant connect
on database postgres
to health;
-- name: update_pw!
alter
user mailu
password :pw;
-- name: check_db
-- check if the mailu db exists
select 1
from pg_database
where datname = 'mailu';
-- name: create_db!
-- create the mailu db
create
database mailu
owner mailu;

@ -1 +0,0 @@
11 4 * * 7 /basebackup.sh > /proc/1/fd/1 2>/proc/1/fd/2

@ -1,65 +0,0 @@
#!/usr/bin/python3
import anosql
import psycopg2
import glob
import os
import subprocess
from socrate import conf
def setup():
conn = psycopg2.connect(user='postgres')
queries = anosql.load_queries('postgres', '/conf/queries.sql')
# Mailu user
queries.create_mailu_user(conn)
queries.update_pw(conn, pw=os.environ.get("DB_PW"))
# Healthcheck user
queries.create_health_user(conn)
queries.grant_health(conn)
conn.commit()
# create db cannot be atomic. But this script is the only active connection, this is kinda safe.
if not queries.check_db(conn):
conn.set_isolation_level(0)
queries.create_db(conn)
conn.set_isolation_level(1)
conn.close()
# Check if /data is empty
if not os.listdir("/data"):
os.system("chown -R postgres:postgres /data")
os.system("chmod 0700 /data")
base_backups=sorted(glob.glob("/backup/base-*"))
if base_backups:
# Restore the latest backup
subprocess.call(["tar", "--same-owner", "-zpxf", base_backups[-1] + "/base.tar.gz" , "-C", "/data"])
if os.listdir("/backup/wal_archive"):
with open("/data/recovery.conf", "w") as rec:
rec.write("restore_command = 'gunzip < /backup/wal_archive/%f > %p'\n")
rec.write("standby_mode = off\n")
os.system("chown postgres:postgres /data/recovery.conf")
else:
# Bootstrap the database
os.system("sudo -u postgres initdb -D /data")
# Create backup directory structure, if it does not yet exist
os.system("mkdir -p /backup/wal_archive")
os.system("chown -R postgres:postgres /backup")
# Render config files
for pg_file in glob.glob("/conf/*.conf"):
conf.jinja(pg_file, os.environ, os.path.join("/data", os.path.basename(pg_file)))
# (Re)start postgresql locally for DB and user creation
os.system("sudo -u postgres pg_ctl start -D /data -o '-h \"''\" '")
while os.path.isfile("recovery.conf"):
pass
os.system("sudo -u postgres pg_ctl -D /data promote")
setup()
os.system("sudo -u postgres pg_ctl stop -m smart -w -D /data")
out=open("/proc/1/fd/1", "w")
err=open("/proc/1/fd/2", "w")
# Run the cron deamon
subprocess.Popen(["crond", "-f"], stdout=out, stderr=err)
# Run postgresql service
os.system("sudo -u postgres postgres -D /data -h \*")

@ -29,9 +29,9 @@ In the example below the string entered in the input field is stored in the vari
<input type="text" name="var_test">
```
In order to user the variable furter you use it like `{{ var_test }}`
In order to use the variable furter you use it like `{{ var_test }}`
In the setup page (`flavors/kubernetes/setup.html`) you cand add steps by importing macros
In the setup page (`flavors/kubernetes/setup.html`) you can add steps by importing macros
```
{% import "macros.html" as macros %}

@ -151,16 +151,6 @@ services:
- imap
{% endif %}
{% if db_flavor == 'postgresql' and postgresql == 'internal' %}
database:
image: ${DOCKER_ORG:-mailu}/${DOCKER_PREFIX:-}postgresql:${MAILU_VERSION:-{{ version }}}
restart: always
env_file: {{ env }}
volumes:
- "{{ root }}/data/psql_db:/data"
- "{{ root }}/data/psql_backup:/backup"
{% endif %}
networks:
default:
{% if ipv6_enabled %}

@ -177,18 +177,15 @@ TZ=Etc/UTC
# Database settings
###################################
DB_FLAVOR={{ db_flavor }}
{% if db_flavor == 'postgresql' and postgresql == 'internal' %}
DB_PW={{ secret(16) }}
{% endif %}
{% if postgresql == 'external' or db_flavor == 'mysql' %}
{% if db_flavor == 'postgresql' or db_flavor == 'mysql' %}
DB_USER={{ db_user }}
DB_PW={{ db_pw }}
DB_HOST={{ db_url }}
DB_NAME={{ db_name }}
{% endif %}
{% if (postgresql == 'external' or db_flavor == 'mysql') and webmail_type == 'roundcube' %}
ROUNDCUBE_DB_FLAVOR={{ db_flavor }}
{% if ((db_flavor_rc == 'postgresql' or db_flavor_rc == 'mysql')) and webmail_type == 'roundcube' %}
ROUNDCUBE_DB_FLAVOR={{ db_flavor_rc }}
ROUNDCUBE_DB_USER={{ roundcube_db_user }}
ROUNDCUBE_DB_PW={{ roundcube_db_pw }}
ROUNDCUBE_DB_HOST={{ roundcube_db_url }}

@ -129,16 +129,6 @@ services:
disable: true
{% endif %}
{% if db_flavor == 'postgresql' and postgresql == 'internal' %}
database:
image: ${DOCKER_ORG:-mailu}/postgresql:${MAILU_VERSION:-{{ version }}}
env_file: {{ env }}
volumes:
- "{{ root }}/data/psql_backup:/backup"
healthcheck:
disable: true
{% endif %}
networks:
default:
driver: overlay

@ -35,80 +35,57 @@ $(document).ready(function() {
$(document).ready(function() {
if ($("#database").val() == 'sqlite') {
$("#postgres_db").hide();
} else if ($("#database").val() == 'postgresql') {
$("#postgres_db").show();
} else if ($("#database").val() == 'mysql') {
$("#external_db").hide();
} else if ($("#database").val() != 'sqlite') {
$("#external_db").show();
}
if ($('#external_psql').prop('checked')) {
$("#external_db").show();
$("#webmail").click(function() {
if (this.value == 'roundcube') {
$("#db_flavor_rc_sel").show();
} else {
$("#db_flavor_rc_sel").hide();
$("#roundcube_db_user").prop('required',false);
$("#roundcube_db_pw").prop('required',false);
$("#roundcube_db_url").prop('required',false);
$("#roundcube_db_name").prop('required',false);
}
});
$("#database").click(function() {
if (this.value == 'sqlite') {
$("#postgres_db").hide();
$("#external_db").hide();
} else if (this.value == 'postgresql') {
$("#postgres_db").show();
$("#external_db").hide();
$("#external_psql").prop('checked', true);
$("#external_db").show();
$("#db_user").prop('required',true);
$("#db_pw").prop('required',true);
$("#db_url").prop('required',true);
$("#db_name").prop('required',true);
if ($("#webmail").val() == 'roundcube') {
$("#roundcube_external_db").show();
$("#roundcube_db_user").prop('required',true);
$("#roundcube_db_pw").prop('required',true);
$("#roundcube_db_url").prop('required',true);
$("#roundcube_db_name").prop('required',true);
}
} else if (this.value == 'mysql') {
$("#postgres_db").hide();
$("#external_db").show();
$("#db_user").prop('required',true);
$("#db_pw").prop('required',true);
$("#db_url").prop('required',true);
$("#db_name").prop('required',true);
if ($("#webmail").val() == 'roundcube') {
$("#roundcube_external_db").show();
$("#roundcube_db_user").prop('required',true);
$("#roundcube_db_pw").prop('required',true);
$("#roundcube_db_url").prop('required',true);
$("#roundcube_db_name").prop('required',true);
}
}
});
$("#external_psql").change(function() {
if ($(this).is(":checked")) {
$("#external_db").show();
$("#db_user").prop('required',true);
$("#db_pw").prop('required',true);
$("#db_url").prop('required',true);
$("#db_name").prop('required',true);
if ($("#webmail").val() == 'roundcube') {
$("#roundcube_external_db").show();
$("#roundcube_db_user").prop('required',true);
$("#roundcube_db_pw").prop('required',true);
$("#roundcube_db_url").prop('required',true);
$("#roundcube_db_name").prop('required',true);
}
} else {
$("#external_db").hide();
}
});
$("#internal_psql").change(function() {
if ($(this).is(":checked")) {
$("#external_db").hide();
$("#db_user").val("");
$("#db_pw").val("");
$("#db_url").val("");
$("#db_name").val("");
$("#db_user").prop('required',false);
$("#db_pw").prop('required',false);
$("#db_url").prop('required',false);
$("#db_name").prop('required',false);
$("#roundcube_db_user").prop('required',false);
$("#roundcube_db_pw").prop('required',false);
$("#roundcube_db_url").prop('required',false);
$("#roundcube_db_name").prop('required',false);
} else if (this.value != 'sqlite') {
$("#external_db").show();
$("#db_user").prop('required',true);
$("#db_pw").prop('required',true);
$("#db_url").prop('required',true);
$("#db_name").prop('required',true);
}
});
$("#database_rc").click(function() {
if (this.value == 'sqlite'){
$("#roundcube_external_db").hide();
$("#roundcube_db_user").prop('required',false);
$("#roundcube_db_pw").prop('required',false);
$("#roundcube_db_url").prop('required',false);
$("#roundcube_db_name").prop('required',false);
}
if (this.value != 'sqlite' && $("#webmail").val() == 'roundcube') {
$("#roundcube_external_db").show();
$("#roundcube_db_user").prop('required',true);
$("#roundcube_db_pw").prop('required',true);
$("#roundcube_db_url").prop('required',true);
$("#roundcube_db_name").prop('required',true);
}
});
});

@ -8,25 +8,6 @@
<option value="{{ dbflavor }}" >{{ dbflavor }}</option>
{% endfor %}
</select>
<p></p>
<div id="postgres_db" style="display: none">
<div class="form-check">
<input class="form-check-input" type="radio" name="postgresql" id="internal_psql" value="internal">
<label class="form-check-label" for="internal_psql">
Use the PostgreSQL image from Mailu. Warning, this image is deprecated.
It will be removed from Mailu 1.9. Existing users can still upgrade to Mailu 1.8 using this image.
With the release of Mailu 1.9,
we will offer a mechanism for migrating your data to another database management system.
</label>
</div>
<div class="form-check">
<input class="form-check-input" type="radio" name="postgresql" value="external" id="external_psql">
<label class="form-check-label" for="external_psql">
I want to connect to an external database
</label>
</div>
<br/>
</div>
<div class="form-group" id="external_db" style="display: none">
<p>Set external database parameters for <b>Admin UI</b></p>
<label>DB User</label>
@ -38,6 +19,14 @@
<label>Db Name</label>
<input class="form-control" type="text" name="db_name" placeholder="Database Name" id="db_name">
<br/>
<div class="form-group" id="db_flavor_rc_sel" style="display: none">
<label>Which database back end would you like to use for roundcube?</label>
<br/>
<select class="btn btn-primary dropdown-toggle" name=db_flavor_rc id="database_rc">
{% for dbflavor_rc in ["sqlite", "postgresql", "mysql"] %}
<option value="{{ dbflavor_rc }}" >{{ dbflavor_rc }}</option>
{% endfor %}
</select>
<div class="form-group" id="roundcube_external_db" style="display: none">
<p>Set external database parameters for <b>Roundcube</b></p>
<label>DB User</label>
@ -51,5 +40,6 @@
</div>
</div>
</div>
</div>
{% endcall %}

@ -38,10 +38,6 @@ services:
image: ${DOCKER_ORG:-mailu}/${DOCKER_PREFIX:-}admin:${MAILU_VERSION:-local}
build: ../core/admin
postgresql:
image: ${DOCKER_ORG:-mailu}/postgresql:${MAILU_VERSION:-local}
build: ../optional/postgresql
roundcube:
image: ${DOCKER_ORG:-mailu}/${DOCKER_PREFIX:-}roundcube:${MAILU_VERSION:-local}
build: ../webmails/roundcube

Loading…
Cancel
Save