Merge pull request #652 from usrpro/improve-docs

Some documentation flow refactoring and updates
master
mergify[bot] 6 years ago committed by GitHub
commit 7bccfa69a8
No known key found for this signature in database
GPG Key ID: 4AEE18F83AFDEB23

@ -26,36 +26,61 @@ for the ``VERSION_TAG`` branch, use:
wget https://mailu.io/VERSION_TAG/_downloads/docker-compose.yml
wget https://mailu.io/VERSION_TAG/_downloads/.env
Then open the ``.env`` file to setup the mail server. Modify the ``ROOT`` setting
to match your setup directory if different from ``/mailu``.
Important configuration variables
---------------------------------
Modify the ``VERSION`` configuration in the ``.env`` file to reflect the version you picked.
Open the ``.env`` file and review the following variable settings:
Set the common configuration values
-----------------------------------
- Change ``ROOT`` if you have your setup directory in a different location then ``/mailu``.
- Check ``VERSION`` to reflect the version you picked. (``master`` or ``1.5``).
Open the ``.env`` file and set configuration settings after reading the configuration
documentation. Some settings are specific to the Docker Compose setup.
Make sure to read the comments in the file and instructions from the :ref:`common_cfg` section.
Modify ``BIND_ADDRESS4`` to match the public IP address assigned to your server.
This address should be configured on one of the network interfaces of the server.
If the address is not configured directly (NAT) on any of the network interfaces or if
you would simply like the server to listen on all interfaces, use ``0.0.0.0``.
Modify ``BIND_ADDRESS6`` to match the public IPv6 address assigned to your server.
The behavior is identical to ``BIND_ADDRESS4``.
TLS certificates
````````````````
Set the ``TLS_FLAVOR`` to one of the following
values:
- ``cert`` is the default and requires certificates to be setup manually;
- ``letsencrypt`` will use the Letsencrypt! CA to generate automatic ceriticates;
- ``letsencrypt`` will use the *Letsencrypt!* CA to generate automatic ceriticates;
- ``mail`` is similar to ``cert`` except that TLS will only be served for
emails (IMAP and SMTP), not HTTP (use it behind reverse proxies);
- ``mail-letsencrypt`` is similar to ``letsencrypt`` except that TLS will only be served for
emails (IMAP and SMTP), not HTTP (use it behind reverse proxies);
- ``notls`` will disable TLS, this is not recommended except for testing.
.. note::
When using *Letsencrypt!* you have to make sure that the DNS ``A`` and ``AAAA`` records for the
all hostnames mentioned in the ``HOSTNAMES`` variable match with the ip adresses of you server.
Or else certificate generation will fail! See also: :ref:`dns_setup`.
Bind address
````````````
Modify ``BIND_ADDRESS4`` and ``BIND_ADDRESS6`` to match the public IP addresses assigned to your server. For IPv6 you will need the ``<global>`` scope address.
You can find those addresses by running the following:
.. code-block:: bash
[root@mailu ~]$ ifconfig eth0
eth0: flags=4163<UP,BROADCAST,RUNNING,MULTICAST> mtu 1500
inet 125.189.138.127 netmask 255.255.255.0 broadcast 5.189.138.255
inet6 fd21:aab2:717c:cc5a::1 prefixlen 64 scopeid 0x0<global>
inet6 fe2f:2a73:43a8:7a1b::1 prefixlen 64 scopeid 0x20<link>
ether 00:50:56:3c:b2:23 txqueuelen 1000 (Ethernet)
RX packets 174866612 bytes 127773819607 (118.9 GiB)
RX errors 0 dropped 0 overruns 0 frame 0
TX packets 19905110 bytes 2191519656 (2.0 GiB)
TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0
If the address is not configured directly (NAT) on any of the network interfaces or if
you would simply like the server to listen on all interfaces, use ``0.0.0.0`` and ``::``. Note that running is this mode is not supported and can lead to `issues`_.
.. _issues: https://github.com/Mailu/Mailu/issues/641
Enable optional features
------------------------

@ -1,12 +1,20 @@
Mailu configuration settings
============================
.. _common_cfg:
Common configuration
--------------------
The ``SECRET_KEY`` **must** be changed for every setup and set to a 16 bytes
randomly generated value. It is intended to secure authentication cookies
among other critical uses.
among other critical uses. This can be generated with a utility such as *pwgen*,
which can be installed on most Linux systems:
.. code-block:: bash
apt-get install pwgen
pwgen 16 1
The ``DOMAIN`` holds the main e-mail domain for the server. This email domain
is used for bounce emails, for generating the postmaster email and other

@ -1,3 +1,5 @@
.. _dns_setup:
Setting up your DNS
===================

@ -32,7 +32,7 @@ user. Make sure you complete the requirements for the flavor you chose.
You should also have at least a DNS hostname and a DNS name for receiving
emails. Some instructions are provided on the matter in the article
[Setup your DNS](dns).
:ref:`dns_setup`.
.. _`MFAshby's fork`: https://github.com/MFAshby/Mailu
@ -68,10 +68,9 @@ Make sure that you test properly before going live!
- Try to receive an email from an external service
- Check the logs (``docker-compose logs -f servicenamehere``) to look for
warnings or errors
- Use an open relay checker like `mailradar`_
- Use an open relay checker like `mxtoolbox`_
to ensure you're not contributing to the spam problem on the internet.
All tests there should result in "Relay denied".
- If using DMARC, be sure to check the reports you get to verify that legitimate
email is getting through and forgeries are being properly blocked.
.. _mailradar: http://www.mailradar.com/openrelay/
.. _mxtoolbox: https://mxtoolbox.com/diagnostic.aspx

Loading…
Cancel
Save